mo1:
./host/osmocon/osmocon -m c123xor -p /dev/ttyUSB0
./target/firmware/board/compal_e88/layer1.compalram.bin
mo2:
./host/osmocon/osmocon -m c123xor -p /dev/ttyUSB1
./target/firmware/board/compal_e88/layer1.compalram.bin
If if use only one mobile, ttyUSB0 / ttyUSB1 is working,
but if I started both at the same time, only one mobile is working.
Same with 2 different firmwares.
How can I set up more phones to get the whole frame / up- and downlink.
1) You must launch everything twice, including launching ccch_scan (or
layer23 for older version).
2) Look in the command line option of osmocon and ccch_scan, you will
find an option to specify the l2 socket. Each pair of software needs a
different socket.
3) There is a software in the gprs git to then 'combine' both output
in a single file