6 Apr
2010
6 Apr
'10
4:09 a.m.
Hi Steve!
On Tue, Apr 06, 2010 at 12:24:15AM +0200, Steve Markgraf wrote:
I've added support for the Calypso
"non-secure" romloader in my
branch steve-m/osmocon.
good news! I'll review the branch asap.
This means we now can execute our code on devices like
the Motorola
W220, the BenQ A38 (which I've used for development), and the
OpenMoko devices (can anyone try to cross-compile osmocon and see if
it works?).
You actually don't have to try to cross-compile as the IRDA UART of the
Calypso in the Openmoko is attached to the earphone jack, just like in
the non-smartphone calypso designs.
But sure, it would be great to test it on both the MODEM UART (from the
s3c24xx side) and from the IRDA UART / earphone jack.
For more information see in the wiki:
http://bb.osmocom.org/trac/wiki/CalypsoRomloader
thanks a lot, I've started to read through it.
I also added a new model switch for the C140 (-m
c140), which
automatically adds the "1003" string in the uploaded binary.
... assuming that nothing important is at the respective address in the
image, I suppose? Do we have a way (by linker script tricks?) to ensure
that there is some bogus data at that location? Last time I checked, I
could not figure out a way to tell the linker "start filling .text from
address A to B, then exclude B to C and continue filling from C
upwards".
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)