Comprehensive User Directive Manual Needed

Hi all, I am really thrill to set up OsmocomBB program single handedly after scourging through mailing list and crash learning linux environment from online tutorials. This is an amazing project with a lot of concept and idea that can only be acquired through years of working as a developer. I really appreciate the great work each and everyone put into this project and I am taking advantage of this to set myself back as a programmer. Could there be a comprehensive documentation on how to setup the the project from the first stage of firmware download to the linking of various applications to the running osmocon program. It took a lot of time to get myself around the project before I could finally set it up. Beside the core participant programmers and those that were previously familiar with this nature of application many of the interested enthusiast like me are left in the dark on what to do at one point or the other during the set up of the project. For an instance after successfully setting up the osmocomBB, I couldn't run the program with my C155 just for the fact that I mistakenly took the passing parameter for C155 for "C155xor" following the given example based on C123. It took me over two days to realized where the error was all because I was having legitimate error report of "NACK" that was explained on the blog to be due to different transmission rate between the hosting system and the MS onboard chip. By stroke of luck, I removed the "xor" based on solution suggested for similar issue on different Motorola model and VIOLA !!! firmware completes downloading and I'm set on track . The funniest thing is that it was after I've resolved the problem that I later read the reference to the C155 parameter passing. Secondly, setting up config file for MOBILE APP was like searching for needle in the hail. My thought was that the file needed to contain a written configuration of VTY with telnet parameters. That took me on a journey of learning what telnet is, what Virtual Terminal is. Anyway, I learn a lot from googling here and there before I finally read in some solution that the file is just an empty file. I know that it might be trivial issue to many of the grounded programmers but to some like me it was really a big issue. Right now I am running the Mobile App and about to setup the patch wireshark but still have no clue of what command to send through the telnet interface or what next to do on the Mobile prompt section. It will be a nice to have a compiled possible errors that newbies might encounter and as well a basic step on what to do at each stage of setting up and running of the programs. Just to give a little background about myself; I have a two semester of wireless technology as part of my graduate study and I intend to use OsmocomBB as the basis of my thesis on analyzing GSM Um interface. Great work guys and God bless. Rasak -- View this message in context: http://baseband-devel.722152.n3.nabble.com/Comprehensive-User-Directive-Man… Sent from the baseband-devel mailing list archive at Nabble.com.