It is my understanding that much of the work for this has been done in the
jolly/testing branch:
https://github.com/osmocom/osmocom-bb/commit/687bc2318d18073d02756ef6ea5b96…
Hopefully all that is needed is to add code for a -3, -4, etc command-line
option and all the underlying data structures are already in place. I keep
meaning to look into it further one of these days but have not gotten
around to it yet.
Cheers,
Rusty
On Mon, Jul 7, 2014 at 12:39 PM, Erich Dachleger <edachleger(a)yahoo.com>
wrote:
Is it possible to use Three phones to support more
than 2 timeslots?Do you
use another branch? I cannot find tjhat info anywhere in the
network-from-scratch page, two phones ,however work ok. And in the help
output from transceiver app I find only the -2 option explicitly mentioned.
However a third socket, osmocom_l2.3 is established after connecting third
phone and launching the trx-firmware, but transceiver says:
invalid option -- '3'.
regards erich
Den Onsdag, 2. juli 2014 23.23 skrev trixbox.t <trixbox.t(a)yandex.ru>ru>:
Hello!
I tried all suggestions and I still have a question "how to connect 3 phone
to transceiver ?"
i.e.
1. phone - # osmocon -p /dev/ttyUSB0 -m c123xor -c path_to/trx.highram.bin
-r 99
2. phone - # osmocon -p /dev/ttyUSB1 -s /tmp/osmocom_l2.2 -m c123xor -c
path_to/trx.highram.bin -r 99
3. phone - # osmocon -p /dev/ttyUSB2 -s /tmp/osmocom_l2.3 -m c123xor -c
path_to/trx.highram.bin -r 99
and transceiver -e 5 -r 99 -3
what I need to change in osmocom-bb2/src/host/layer23/src/transceiver/,
to get it working???
thank you all !!!
--
View this message in context:
http://baseband-devel.722152.n3.nabble.com/OpenBTS-OsmocomBB-Asterisk-tp402…
Sent from the baseband-devel mailing list archive at
Nabble.com.