Hi,
Did you use the sylvain/testing branch and compile firmware with TX support?
Also as I see from
No Mobile Station defined, creating: MS '1'
you have not config for mobile, may be you should create it in
~/.osmocom/bb/osmocom.cfg and define config for ms 1 with 'sim reader',
'network-selection-mode auto' and 'no shutdown' options. Or do it in
console
as Loretta says.
PS: I'm new to Osmocom BB, so it's just my first steps with this project. I
use C118 and C115 and they could connect to network and make calls.
~Pavel
On Thu, Sep 8, 2011 at 4:37 PM, karnatinagesh(a)gmail.com <
karnatinagesh(a)gmail.com> wrote:
Hi screaming-pain,
i tried the way u mentioned. but still i am not able to latch on to the
N/W.
Please find below the Logs.
nagesh@nagesh:~/osmocom-bb/src/host/layer23/src/mobile$ ./mobile -i
127.0.0.1
Copyright (C) 2008-2010 ...
Contributions by ...
License GPLv2+: GNU GPL version 2 or later
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
VTY available on port 4247.
No Mobile Station defined, creating: MS '1'
<000f> sim.c:1206 init SIM client
<0006> gsm48_cc.c:61 init Call Control
<0001> gsm48_rr.c:5095 init Radio Ressource process
<0005> gsm48_mm.c:1312 init Mobility Management process
<0005> gsm48_mm.c:1035 Selecting PLMN SEARCH state, because no SIM.
<0002> gsm322.c:5023 init PLMN process
<0003> gsm322.c:5024 init Cell Selection process
***
Warning: Mobile '1' has default IMEI: 000000000000000
This could relate your identitiy to other users with default IMEI.
***
Mobile '1' initialized, please start phone now!
<0002> gsm322.c:3804 (ms 1) Event 'EVENT_SWITCH_ON' for automatic PLMN
selection in state 'A0 null'
<000e> gsm322.c:1356 SIM is removed
<0002> gsm322.c:1357 SIM is removed
<0002> gsm322.c:800 new state 'A0 null' -> 'A6 no SIM inserted'
<0003> gsm322.c:4035 (ms 1) Event 'EVENT_SWITCH_ON' for Cell selection in
state 'C0 null'
<0003> gsm322.c:3700 Switch on without SIM.
<0003> gsm322.c:823 new state 'C0 null' -> 'C6 any cell
selection'
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (0..0)
<0003> gsm322.c:2888 Getting PM for ARFCN 0 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (512(DCS)..512(DCS))
<0003> gsm322.c:2888 Getting PM for ARFCN 512(DCS) twice. Overwriting the
first! Please fix prim_pm.c
^A<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (955..955)
<0003> gsm322.c:2888 Getting PM for ARFCN 955 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2812 Found no frequency.
<0003> gsm322.c:2124 Cell search finished without result.
<0003> gsm322.c:823 new state 'C6 any cell selection' -> 'C0
null'
<0002> gsm322.c:3804 (ms 1) Event 'EVENT_NO_CELL_FOUND' for automatic PLMN
selection in state 'A6 no SIM inserted'
<0003> gsm322.c:4035 (ms 1) Event 'EVENT_NO_CELL_FOUND' for Cell selection
in state 'C0 null'
<0003> gsm322.c:823 new state 'C0 null' -> 'C6 any cell
selection'
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (0..0)
<0005> gsm48_mm.c:4188 (ms 1) Received 'MM_EVENT_NO_CELL_FOUND' event in
state MM IDLE, PLMN search
<0005> gsm48_mm.c:907 new MM IDLE state PLMN search -> no cell available
<0003> gsm322.c:2888 Getting PM for ARFCN 0 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (512(DCS)..512(DCS))
<0003> gsm322.c:2888 Getting PM for ARFCN 512(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (955..955)
<0003> gsm322.c:2888 Getting PM for ARFCN 955 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2812 Found no frequency.
<0003> gsm322.c:2124 Cell search finished without result.
<0003> gsm322.c:823 new state 'C6 any cell selection' -> 'C0
null'
<0002> gsm322.c:3804 (ms 1) Event 'EVENT_NO_CELL_FOUND' for automatic PLMN
selection in state 'A6 no SIM inserted'
<0003> gsm322.c:4035 (ms 1) Event 'EVENT_NO_CELL_FOUND' for Cell selection
in state 'C0 null'
<0003> gsm322.c:823 new state 'C0 null' -> 'C6 any cell
selection'
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (0..0)
<0005> gsm48_mm.c:4188 (ms 1) Received 'MM_EVENT_NO_CELL_FOUND' event in
state MM IDLE, no cell available
<0005> gsm48_mm.c:4201 Message unhandled at this state.
<0003> gsm322.c:2888 Getting PM for ARFCN 0 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (512(DCS)..512(DCS))
<0003> gsm322.c:2888 Getting PM for ARFCN 512(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (955..955)
<0003> gsm322.c:2888 Getting PM for ARFCN 955 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2812 Found no frequency.
<0003> gsm322.c:2124 Cell search finished without result.
<0003> gsm322.c:823 new state 'C6 any cell selection' -> 'C0
null'
<0002> gsm322.c:3804 (ms 1) Event 'EVENT_NO_CELL_FOUND' for automatic PLMN
selection in state 'A6 no SIM inserted'
<0003> gsm322.c:4035 (ms 1) Event 'EVENT_NO_CELL_FOUND' for Cell selection
in state 'C0 null'
<0003> gsm322.c:823 new state 'C0 null' -> 'C6 any cell
selection'
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (0..0)
<0005> gsm48_mm.c:4188 (ms 1) Received 'MM_EVENT_NO_CELL_FOUND' event in
state MM IDLE, no cell available
<0005> gsm48_mm.c:4201 Message unhandled at this state.
<0003> gsm322.c:2888 Getting PM for ARFCN 0 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (512(DCS)..512(DCS))
<0003> gsm322.c:2888 Getting PM for ARFCN 512(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (955..955)
<0003> gsm322.c:2888 Getting PM for ARFCN 955 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2812 Found no frequency.
<0003> gsm322.c:2124 Cell search finished without result.
<0003> gsm322.c:823 new state 'C6 any cell selection' -> 'C0
null'
<0002> gsm322.c:3804 (ms 1) Event 'EVENT_NO_CELL_FOUND' for automatic PLMN
selection in state 'A6 no SIM inserted'
<0003> gsm322.c:4035 (ms 1) Event 'EVENT_NO_CELL_FOUND' for Cell selection
in state 'C0 null'
<0003> gsm322.c:823 new state 'C0 null' -> 'C6 any cell
selection'
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (0..0)
<0005> gsm48_mm.c:4188 (ms 1) Received 'MM_EVENT_NO_CELL_FOUND' event in
state MM IDLE, no cell available
<0005> gsm48_mm.c:4201 Message unhandled at this state.
<0003> gsm322.c:2888 Getting PM for ARFCN 0 twice. Overwriting the first!
Please fix prim_pm.c
<0003> gsm322.c:2900 Found signal (ARFCN 33 rxlev -103 (7))
<0003> gsm322.c:2912 Done with power scanning range.
<0003> gsm322.c:2790 Scanning power for all frequencies.
<0003> gsm322.c:2851 Scanning frequencies. (512(DCS)..512(DCS))
<0003> gsm322.c:2888 Getting PM for ARFCN 512(DCS) twice. Overwriting the
first! Please fix prim_pm.c
--
View this message in context:
http://baseband-devel.722152.n3.nabble.com/Not-able-to-connect-to-Network-u…
Sent from the baseband-devel mailing list archive at
Nabble.com.