Re: running error with branch burst_ind

Hi all, Working with a C118 and everything was fine with the master branch, then switched to the burst_ind branch and complied successfully, when running: $ ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/layer1.compalram.bin got 1 bytes from modem, data looks like: 2f / got 1 bytes from modem, data looks like: 00 . got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....A got 1 bytes from modem, data looks like: 01 . got 1 bytes from modem, data looks like: 40 @ Received PROMPT1 from phone, responding with CMD read_file(../../target/firmware/board/compal_e88/layer1.compalram.bin): file_size=48564, hdr_len=4, dnload_len=48571 got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 43 C Received PROMPT2 from phone, starting download handle_write(): 4096 bytes (4096/48571) handle_write(): 4096 bytes (8192/48571) handle_write(): 4096 bytes (12288/48571) handle_write(): 4096 bytes (16384/48571) handle_write(): 4096 bytes (20480/48571) handle_write(): 4096 bytes (24576/48571) handle_write(): 4096 bytes (28672/48571) handle_write(): 4096 bytes (32768/48571) handle_write(): 4096 bytes (36864/48571) handle_write(): 4096 bytes (40960/48571) handle_write(): 4096 bytes (45056/48571) handle_write(): 3515 bytes (48571/48571) handle_write(): finished got 1 bytes from modem, data looks like: 1b . got 1 bytes from modem, data looks like: f6 . got 1 bytes from modem, data looks like: 02 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 03 . got 1 bytes from modem, data looks like: 42 B Received DOWNLOAD ACK from phone, your code is running now! ioctl(TIOCSSERIAL): Invalid argument $ ./mobile Copyright (C) 2008-2010 ... Contributions by ... License GPLv2+: GNU GPL version 2 or later <

This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. VTY available on port 4247. No Mobile Station defined, creating: MS '1' <000e> sim.c:1206 init SIM client <0005> gsm48_cc.c:61 init Call Control <0001> gsm48_rr.c:4944 init Radio Ressource process <0004> gsm48_mm.c:1220 init Mobility Management process <0004> gsm48_mm.c:971 Selecting PLMN SEARCH state, because no SIM. <0002> gsm322.c:3471 init PLMN process <0003> gsm322.c:3472 init Cell Selection process <0003> gsm322.c:3526 No stored BA list Mobile '1' initialized, please start phone now! then no reaction with the mobile application either rebooting the phone (press power bottom) or not, for layer23 application acts the same. tried to search for the message "ioctl(TIOCSSERIAL): Invalid argument" but failed to get any useful information. could anyone help and many thanks for your time and considerations! best regards, flaw