3 Dec
2017
3 Dec
'17
12:35 p.m.
Hi,
Length of the cable and the type of serial adapter can also cause some issues.
What adapter are you using?
Cheers,
Domi
2017. dec. 3. dátummal, 12:09 időpontban Felix Angga <felangga(a)gmail.com> írta:
Yes I've tried using xor and without xor.
I'm running on bare hardware. Linux mint 18.
Do I need to configure baud rate? Or the default 115200 should be OK?
Hmm okay, i'll try on other computer.
Btw, will it be affected with the length of the cable?
On Dec 3, 2017 6:00 PM, "Harald Welte" <laforge(a)gnumonks.org> wrote:
On Sat, Dec 02, 2017 at 10:43:40PM +0700, felangga(a)gmail.com wrote:
$ host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor
target/firmware/board/
compal_e88/hello_world.compalram.bin -c
have you tried 'c123' without XOR? Are you running in some kind of VM
or on bare hardware? The timing is very critical, and some combinations
of hardware + drivers + software are not able to fulfill the strict
timing requirements.
In case of doubt, try using a different computer.
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)