I can’t turn ON my phone anymore. I had everything working fine until the final step in
the following:
$ host/osmocon/osmoload funlock 0x000000 0x10000
$ host/osmocon/osmoload ferase 0x000000 0x10000
$ host/osmocon/osmoload fprogram 0 0x000000 compal_loader.bin
$ host/osmocon/osmoload fprogram 0 0x002000
target/firmware/board/compal_e88/loader.e88loader.bin
I used loader.highram.bin instead of loader.e88loader.bin. I didn’t get any errors even
after this step but then I couldn’t do anything with the phone.
Best regards,
Robert,
On Feb 29, 2016, at 2:58 PM, Craig Comstock <craig_comstock(a)yahoo.com> wrote:
I'll take a look at my code. Can you send a log of
any data you get over the serial port when you turn on the phone? What makes you think you
bricked the phone? What steps did you take and at which point did you think the phone was
bricked?
On February 29, 2016 6:48:04 AM CST, robert <robert.steve07(a)gmail.com> wrote:
The problem is that I didn’t find the required file “loader.e88loader.bin”. Should I use
another branch for this purpose? Also I think that I already bricked my C118.
Best regards,
Robert,
On Feb 29, 2016, at 2:43 PM, Craig Comstock <craig_comstock(a)yahoo.com> wrote:
As Sylvain said you probably want to use quite a
bit of caution to not brick phones. That said, I added some changes a while ago locally
(not in the repo) to flash my c139 phone and haven't gotten any bricks yet (cross
fingers). I was working on getting nuttx-bb flashed as a sole app on the phone, debugging
startup problems and re-flashing repeatedly.
YMMV of course.
I don't think my changes are terribly interesting but can dig them up if you get
stuck.
Probably you need to add some memory config and build targets to make the loader for e88?
That is similar to some of my changes.
Craig
On February 29, 2016 6:19:35 AM CST, Sylvain Munaut <246tnt(a)gmail.com> wrote:
Can someone confirm if the steps described in
http://bb.osmocom.org/trac/wiki/flashing are still valid, as I can’t find
“loader.e88loader.bin”. I’m using sylvain/testing branch.
Probably not.
And unless you know how to recover things with JTAG or have a lot of
spare phones and you're ready to brick a bunch of them, I wouldn't
even attempt flashing.
Both the code and the instructions related to it are pretty much
unmaintained / untested and use at your own risk.
Cheers,
Sylvain
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.