24 May
2011
24 May
'11
12:51 a.m.
On Mon, 2011-05-23 at 13:43 +0200, Uli Kleemann wrote:
Hi fellows,
I am new at osmocon and I would like to ask fpr some help about
flashing the firmware on my C118.
I build the software as described on Ubuntu11.0.4 using gnuarm-3.4.3.
I use the Motorola T191 serial-cable on an Prolific Technology, Inc.
PL2303 Serial Port USB-Serial adapter. (module USB-serial is loaded)
when I startosmocon like this:
./osmocon -p /dev/ttyUSB0 -m c123xor
../../target/firmware/board/compal_e88/loader.compalram.bin
all I get is that:
got 2 bytes from modem, data looks like: fe 00 ..
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
Just looks like noise from plugging the cable in to the phone.
Can anybody give me an advice how to fix that?
Did you press the power button on the phone? Just a quick tap is
required, not a long press like you would normally do to turn it on.
Gianni