3 May
2010
3 May
'10
7:32 p.m.
Hi Marco,
On Mon, May 03, 2010 at 07:17:59PM +0200, Rust, Marco wrote:
The calypso always supports booting from rom _BUT_ the nIBOOT pin determines
whether it boots from external NOR flash or from internal mask-rom.
Since that pin is hard-wired on the circuit board, you will only be able to
activate the calypso romloader on our supported motorola/compal phones if you
unsolder the Calypso BGA package, do some re-work and re-solder it ;)
Generally speaking: As far as I know, only prom (the original author) has been
using/testing the flash support so far. Only he would be able to know what
is supposed to work right now and what isn't.
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
well, at first:
the "-m romload"-switch is only intended for phones
which use the TI Romloader (which the Compal phones don't, and is called
"Romloader" because its stored in the maskrom of the Calypso).
I thought both modes are supported.