burst_ind and TCH

Hi Sylvain, hi list! I'm experimenting with burst_ind and TCHs right now and ran into some problem I couldn't solve yet. After receiving an Assignment Command for a hopping TCH/F I call l1ctl_tx_dm_est_req_h1() with all necessary parameters and tch_mode GSM48_CMODE_SPEECH_V1 or _EFR. After that I do get burst indications containing the received bits on up- and downlink for the active arfcn on each consecutive frame number. BUT the rx level measurements are most of the time very low and sporadic higher, surely not from that nearby bts and the very close cellphone. It looks like the layer1 doesn't "hit" the right timeslot on the right arfcn at the right time. There are some possible sources of error leading to that, like hopping parameters, channel number and MA list. But I checked these and I took all of them directly from the ASS CMD, the MA as word list in ascending order, like in layer23 IMM ASS handling. The specific AC doesn't have any specialties like Starting Time or "before time" parameters. So my question is if there is some obvious pitfall I'm missing and are there any suggestions how to debug that? Regards, Mad