23 May
2016
23 May
'16
5:45 p.m.
Short answer: no & no
1 - A gsm repeater is an analog device. With osmocom-bb phones you would
need to demodulate/remodulate bursts.
This will mess with timing advance, and you won't be able to send bursts in
the same frame/timeslot they were received.
2 - Calypso don't/won't support 3G.
Regards
On Mon, May 23, 2016 at 4:21 PM, Craig Comstock <craig_comstock(a)yahoo.com>
wrote:
The place where I normally play with osmocom-bb has
pretty bad 2G coverage
and I was wondering if I could make a signal booster/repeater with a couple
of osmocom phones?
Also wondering if 3G would require totally different hardware than the old
Calypso motorola phones or if it could be achieved with firmware+DSP
changes?
I have a 3G cell spot that boost that signal so just trying to find a way
to make an osmocom-bb phone work well in my place.
Thanks,
Craig