RE: Cygwin Windows --> Accessing serial port.

Don't hold the power on button. You should just press and release the power button to start the bootloader. Regards, John Hi, Thanks. I was able to access the serial port. I ran the following command ./osmocon -p /dev/ttyS5 -m c123xor ../../target/firmware/board/compal_e88/hello_world.compalram.bin in cygwin I then held the power on button of the phone for some time. I got some output on the cygwin console.It isn't the expected output as per the wiki. After disconnecting, I tried to run the same command and nothing is happening. Can some one please suggest me what steps I need to take to solve the problem. I am using Motorola C115 phone. Regards, RM On Sat, Jun 4, 2011 at 12:12 PM, Dieter Spaar <spaar@mirider.augusta.de<mailto:spaar@mirider.augusta.de>> wrote: Hello Harald, On Sat, 4 Jun 2011 08:46:50 +0200, "Harald Welte" <laforge@gnumonks.org<mailto:laforge@gnumonks.org>> wrote: At least on my Cygwin installation under Windows XP the serial port is accessible as "/dev/ttySx" (x is "0" for COM1, "1" for COM2 and so on). All the USB to serial converters I am aware of are virtual COM ports on Windows which means that they are accessible the same way, e.g. if the virtual COM port is "COM7" it can be be accessed as "/dev/ttyS6", Best regards, Dieter -- Dieter Spaar, Germany spaar@mirider.augusta.de<mailto:spaar@mirider.augusta.de>