Hi Sylvain,
Going through the firmware Makefile I find that you had explicitly enabled
only compalram & highram environments for the loader app in your patch
dated 11.12.2012.
The current wiki on flashing at
http://bb.osmocom.org/trac/wiki/flashing requires
to load "osmoload fprogram 0 0x002000
target/firmware/board/compal_e88/loader.*e88loader*.bin" and flash rssi
applications with "osmoload fprogram 0 0x010000
target/firmware/board/compal_e88/rssi.e88flash.bin".
1. So is the wiki wrong or do we need to patch the Makefile?
2. I want to flash layer1 app so that I don't have to download it every
time. Should I be loading "layer1.e88flash.bin" or
"layer1.compalram.bin"?
Both my questions arise because I don't understand the difference
between layer1.e88flash.bin
and layer1.compalram.bin and layer1.e88loader.bin. I understand that the
highram environment is only for OpenMoko (is that correct?). A note of
clarification will be helpful.
Since I have already bricked a phone on the first point I am not able to
solve these by experimenting. :-(
B.
On Thu, May 23, 2013 at 2:54 PM, Bhaskar11 <niceguy108(a)gmail.com> wrote:
This is my first attempt to flash the loader.
1) The instructions on
http://bb.osmocom.org/trac/wiki/flashing require
loading the file named "target/firmware/board/compal_e88/loader.*e88loader
*.bin".
Strangely I do not have this file after compilation. I have
loader.compalram.bin and loader.highram.bin. I also
have layer1.e88loader.bin and rssi.e88loader.bin.
Can you please guide me?
2) The guide for flashing an application says to use rssi.e88flash.bin.
Does that mean if I want to flash "layer1" as my application, then I must
use layer1.*e88flash*.bin at that point?
Thank you for your help.
B.