I forgot to mention that the reason for the this failure is described in diagnostic as
“CLIR not subscribed”. At each call setup there is a “CLIR invocation” although in the
mobile.cfg file it is set to “no clir”. How can I remove this condition in LCR ?
Best regards,
Robert,
On Feb 22, 2016, at 10:57 AM, robert <robert.steve07(a)gmail.com> wrote:
HI,
When I try to route calls, the osmo phone which is connected to the real network starts
initiating the call but then immediately releases the connection with the following cause
“Requested facility not subscribed”. Does anyone know what is causing this error ?
Best regards,
Robert,
On Feb 14, 2016, at 10:13 PM, Harald Welte <laforge(a)gnumonks.org> wrote:
On Sat, Feb 13, 2016 at 09:31:02AM +0100,
Tomcsányi Domonkos wrote:
As far as I know osmocomBB doesn’t have a SIP
sink yet, you’d need to
create the code for that.
You can connect OsmocomBB via its MNCC interface to LCR as a gsm-ms
channel. This is similar to attaching OsmoNITB via its MNCC interface
as a gsm-bs channel to LCR.
So it should be no problem to connect both OsmoNITB and OsmocomBB
simultaneously to a single LCR instance and route calls vice-versa.
--
- Harald Welte <laforge(a)gnumonks.org>
http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)