Hi
Thanks for your reply. We have tested the configurations that you mailed but our setup
still produces the following error message when osmobts is run;
<0006> scheduler.c:212 Init scheduler for trx=0
<000a> trx_if.c:485 Open transceiver for trx=0
<000a> trx_if.c:496 Waiting for transceiver send clock
There is no such command.
Error occurred during reading below line:
rxgain 12
Unknown TRX 1. Aavialable TRX are: 0..0
Failed to parse the config file: '/root/.osmocom/osmo-bts.cfg'
Any help in this regard is much appreciated. Thanks.
Regards,
Amber & Sarosh
Date: Fri, 24 Apr 2015 08:54:35 -0800
Subject: Query - Running two ARFCN on UmTRX using OsmoBTS
From: andy.avtushenko(a)gmail.com
To: amber_sarosh(a)hotmail.com
CC: fairsupport(a)fairwaves.co
Hello Amber & Sarosh You have to add these lines below into /etc/osmocom/openbsc.cfg
right after trx0 configurationtrx 1 rf_locked 0 arfcn 184 (set the right ARFCN for you
here ) nominal power 23 max_power_red 0 rsl e1 tei 0 timeslot 0
phys_chan_config TCH/F timeslot 1 phys_chan_config TCH/F timeslot 2
phys_chan_config TCH/F timeslot 3 phys_chan_config TCH/F timeslot 4
phys_chan_config TCH/F timeslot 5 phys_chan_config TCH/F timeslot 6
phys_chan_config TCH/F timeslot 7 phys_chan_config TCH/F And add into
etc/osmocom/osmo-bts.cfg
trx 1 rxgain 12 power 0
restart services: sudo sv restart osmo-trx osmo-bts osmo-nitb
Regarding trx band dividing, theoretically it might possible but we haven't tested
that
--
Best regards,Andy