Re: Query - Running two ARFCN on UmTRX using OsmoBTS

Hi Alexander, I'm working on a similar setup as Amber & Sarosh, till about recently I was facing the same error as these guys (where the config file was not parsing the trx 1 and later sections) when I stumbled upon your response. Now I've installed the same versions as suggested by you : osmo_trx: fairwaves/master libosmocore: master libosmo-abis: fairwaves/master libsmpp34: master osmo_bts: fairwaves/debian openbsc: fairwaves/master But somehow my osmobts-trx is not recognizing osmo-trx -------------------------------------------------------- <0001> oml.c:419 L3=0x94eb07e, VAL=0x94eb0ad, DIF=47 <0001> oml.c:790 ADM state already was Unlocked <0001> oml.c:790 ADM state already was Unlocked <0001> oml.c:790 ADM state already was Unlocked <0001> oml.c:790 ADM state already was Unlocked <000b> trx_if.c:187 No response from transceiver for trx=0 <000b> trx_if.c:187 No response from transceiver for trx=0 <000b> trx_if.c:187 No response from transceiver for trx=0 <000b> trx_if.c:187 No response from transceiver for trx=0 -------------------------------------------------------- I'm using UmDESK for this setup. PS- I built osmo-bts with(./configure --enable-trx). I hope that was correct for UmDESK Can you help with this regard? Thanks and Regards, Jijo