As i write, use branch 'umtrx' (default for this repo).
Please excuse typos. Written with a touchscreen keyboard.
--
Regards,
Alexander Chemeris
CEO/Founder Fairwaves LLC
Hi, I am checking out branch master from
git clone -b master
https://github.com/fairwaves/openbts-2.8.git
and when running autoreconf -i I get the following errors:
Makefile.am:31: error: required directory ./sqlite3 does not exist
Makefile.am:31: error: required directory ./CommonLibs does not exist
Makefile.am:31: error: required directory ./SR does not exist
What am I doing wrong?
I need two versions: one for usrp1 and one for umtrx, what to checkout and
how to configure? Can someone guide me here....
The README file in the above repo says "The script apps/setUpFiles.sh will
create these directories.........."
There is no such script. Is it available somewhere else?
*Gesendet:* Samstag, 02. November 2013 um 08:33 Uhr
*Von:* "Alexander Chemeris" <alexander.chemeris(a)gmail.com>
*An:* "Robert Light" <robert.light(a)gmx.de>
*Cc:* umtrx <umtrx(a)lists.osmocom.org>
*Betreff:* Re: where are current repo versions of UHD, openBTS and
Gnuradio?
On Sat, Nov 2, 2013 at 1:21 AM, Robert Light <robert.light(a)gmx.de> wrote:
Hi, Can someone point me to the current repo of
UHD, openBTS and
Gnuradio ?
I found several locations especially for openBTS
and UHD i.e.:
"-b gprs-exp
https://github.com/fairwaves/openbts-2.8.git"
"-b gprs-exp
https://github.com/chemeris/openbts-p2.8.git"
"-b umtrx
https://github.com/chemeris/openbts-p2.8.git"
So which one of the above is correct?
Official repos are at "fairwaves" user. Repos in my github has more
experimental branches, which you most likely don't need at this time.
git clone
https://github.com/fairwaves/openbts-2.8.git
(branch umtrx)
"https://github.com/chemeris/UHD-Fairwaves.git"
"https://github.com/fairwaves/UHD-Fairwaves.git"
Again, which one of the above is correct?
git clone
https://github.com/fairwaves/openbts-2.8.git
(branch fairwaves/umtrx)
I assume the below is correct:
"wget
http://gnuradio.org/redmine/attachments/download/279/gnuradio-3.4.2.tar.gz
"
The latest GnuRadio from 3.6 series works well for us.
I need a version of UHD, openBTS and Gnuradio
that will run with both
USRP1
and UmTRX at the same time. I mean, one of them
connected at a time, but
I
do not want to have two computers with separate
installations for usrp1
and
UmTRX.
Above versions should work.
Can I configure openBTS with --with-usrp1
--with-singledb --with-uhd ?
I mean, can I enable usrp1 and uhd at the same time ?
How to switch then between usrp1 and UmTRX ?
No, that's not possible.
But given the fact that OpenBTS doesn't require to be installed, it's
easy to have two copies for different configurations.
That said, I recommend you to look into using Osmocom software instead
of OpenBTS or in addition to OpenBTS, which is more stable and is
evolving very fast:
http://openbsc.osmocom.org/trac/wiki/network_from_scratch
--
Regards,
Alexander Chemeris.
CEO, Fairwaves LLC / ООО УмРадио
http://fairwaves.ru