Hi Andrey,
I'll do it ASAP and then send you flash image for FPGA.
Regards,
Andrew Karpenkov
2012/7/19 Andrey Sviyazov <andrey.sviyazov(a)fairwaves.ru>
I found that both Rx divercity switches have zero
state for A and B
control inputs.
Thus both LNA and LNA-D connectors are not switched to Rx inputs of the
LMS's.
To proceed Rx testing I suggest to set the next fixed states in the FPGA:
DIVSW1_P = 1, DIVSW1_N = 0, DIVSW2_P = 1, DIVSW2_N = 0.
In this case LMS1 will be switched to LNA connector, but LMS2 to LNA-D.
Andrew Karpenkov, would you please to make this kind changes, until DIVSW
will controled by host?