Thomas, thanks for file.
But, may be you know, how to convert it to *.cfile for
tx_samples_from_file.exe?
Here attached zip with example of *.cfile which Alexander made for me in
somewhere like MathLab, I think so.
Rename zi_ to zip first.
Alexander, may be you know and then you can convert this file or part of it?
Overall
measurements are close (either above or below) to 1.5/5 for
the 900 band in general. 945 MHz is currently the
best case, but that
is the frequency I spent the most time on with calibration. Do we need
to be consistently below 1.5/5 or just close?
Thanks for the measurements. At the end we should be below that at all
GSM bands. For now it's fine to be close.
I also noticed that your frequency is far off - could you calibrate it
and make pictures of the best and worst case in the 900 band?
Perhaps this is a silly question, but how do I calibrate the clock? or
use an external reference signal?
Actually you can tune LMS frequensy with 1Hz step to compensate known error.
Best regards,
Andrey Sviyazov.