Dear all, On Wed, Nov 07, 2012 at 08:54:29PM +0400, Andrey Sviyazov wrote:
As known, hardware developing impossible without soldering iron. With UmTRXv2 I found that was used very infusible solder paste. As I understand it is due to compliance to Pb-free.
Please note that RoHS is not a requirement in Europe for telecom equipment! So if you have a SMT factory that still uses solder with Pb, you can avoid those issues. -- - Harald Welte <hwelte@sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Schivelbeiner Str. 5 * 10439 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Directors: Holger Freyther, Harald Welte