RE: UmTRX

Thank you very much for your response. I didn’t mention it, but I only want to extract the analog signal (the 25 MHz baseband bandwidth), in order to analyze the spectral content (I would capture this signal with another board developed by us). Therefore, I don’t need to process it with the UmTRX. However I need the UmTRX in order to do this analysis while keeping a phone communication. Best regards, Albert De: john.wilson(a)pathintel.com [mailto:john.wilson@pathintel.com] En nombre de John Wilson Enviado el: lunes, 17 de junio de 2013 11:41 Para: Albert-Miquel Sánchez CC: umtrx(a)lists.osmocom.org Asunto: Re: UmTRX If you need to extract them all simultaneously then you'd need about 25 MHz baseband bandwidth, which I think at the moment is a bit more than the UmTRX can do on one channel, you might be able to do something clever and look across both channels maybe. That's a whole lot of processing as well, I'm guessing you'll be analyzing the signals offline? USRP2 or USRP N series and do about 25 MHz sustained on one channel, you'll need some good network hardware on your PC to prevent overruns. John On 17 June 2013 10:23, Albert-Miquel Sánchez &lt;albertm(a)salleurl.edu&gt; wrote: Hello, I’m an engineer from Spain and I’m interested in a GSM receiver because I would like to study the internal signals for a research project. In particular, I’m interested in the analysis of the IF signal, but, as Alexander told me, the LMS6002D uses zero-IF architecture, so there is no real "IF" signal, there is only baseband signal. I guess I could also use this signal for my purposes, but only if all 124 GSM channels can be found at that point. I’m not sure if this is possible, since there is a low-pass filter before. Does anybody know if I can extract that information, that is, the analogic 124 channels after the RF mixer? If it is not possible with this board, does anybody know if I can do it with another GSM transceiver board? Thank you very much in advance. Best regards, Albert -- Dr. John Wilson Product development engineer, Path Intelligence <http://www.pathintelligence.com/> T +44 2392 388442 @pathintel DETECT • ANALYSE • PREDICT • INFLUENCE <http://www.pathintelligence.com/wp-content/uploads/2013/03/emailmarketingba nner.png> Path Intelligence Limited, registered number 5176274. Registered in England, registered office at 1000 Lakeside North Harbour, Western Road, Portsmouth, UK, PO6 3EN