Re: UmTRX/LMS6002D specific GUI for GnuRadio

Hi all, For the purpose of tuning our Rx performance I've started putting together an UmTRX specific GUI for GnuRadio. Source code is published on github and will be gradually developed there. As usual, patches and improvements are welcome: https://github.com/chemeris/umtrx_scripts GUI === GUI code is located at 'gui' directory. At this moment it is very basic and has FFT, waterfall and scope views together with a minimal set of controls for the Rx side of LMS6002D. Type './umtrx_fft.py --help' to get a list of command-line options. Note, that you have to select Rx channel from the command line. If you want to run an LMS control GUI without spectrum display you could run './lms_ctrl_panel.py' from 'python_lib' directory. Screenshots are attached: umtrx_fft.png - FFT view (default) umtrx_fft_waterfall.png - Waterfall view umtrx_ctrl_panel.png Library ===== Our Python library is under the 'python_lib' directory. It consists of three parts: * umtrx_ctrl.py - Base library which defines primitives for LMS SPI control and UmTRX network discovery. It is pretty well abstracted, so you cuold replace it with your own implementation if you want to talk to some other board with LMS6002D chip, e.g. MyriadRF. * umtrx_lms.py - library which implements all our LMS control logic. * lms_ctrl_panel.py - implementation of the LMS control panel. Also could be used as a standalone control app for LMS. -- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru