30 Apr
2013
30 Apr
'13
9:16 p.m.
I haven't had a chance to check on the Raspberry Pi to see if this issue is fixed by
forcing synchronous mode, but I suspect it is.
http://lists.gnumonks.org/pipermail/osmocom-sdr/2013-April/000588.html
- Ben
On Apr 30, 2013, at 11:07 AM, Alan Corey wrote:
Mine doesn't hang, it just makes a noise. If I
change just the demodulator to AM instead of FM, it doesn't do it. If I set the
squelch level up around 1000 it takes out the signals, but not the noise.
OpenBSD 5.2, ftl_fm from git about 4/23/2013
Alan
-----
Radio Astronomy - the ultimate DX
--- On Tue, 4/30/13, Chourico <lists(a)the-reapers.com> wrote:
From: Chourico <lists(a)the-reapers.com>
Subject: Re: rtl_fm scanning
To: osmocom-sdr(a)lists.osmocom.org
Date: Tuesday, April 30, 2013, 7:53 AM
Colin Stagner <cbs228 <at> gmail.com> writes:
I am also having the rtl_fm scanning bug which was first reported in
http://lists.gnumonks.org/pipermail/osmocom-sdr/2013-February/000485.html
Can anyone else reproduce this bug?
I am having the same problem.
EzTV666, Ubuntu 12.04, kernel 3.2.0-23,
latest rtl_sdr from git, 2013-04-30
rtl_fm works fine when only one frequency is specified, hangs after first
frequency is skipped.