[PATCH] Add option '-T' for activating bias-T in rtl_(adsb|fm|power|tcp)

From: hayati ayguen &lt;h_ayguen(a)web.de&gt; * added debug output when activating Signed-off-by: hayati ayguen &lt;h_ayguen(a)web.de&gt; * fixed options argument Signed-off-by: Fabian P. Schmidt &lt;kerel-fs(a)gmx.de&gt; --- This patch was generated from branch feature/add-bias-t-frontend at https://github.com/kerel-fs/librtlsdr/tree/feature/add-bias-t-frontend Sincerely, Fabian P. Schmidt / kerel src/rtl_adsb.c | 11 ++++++++++- src/rtl_fm.c | 11 ++++++++++- src/rtl_power.c | 11 ++++++++++- src/rtl_tcp.c | 13 +++++++++++-- 4 files changed, 41 insertions(+), 5 deletions(-) diff --git a/src/rtl_adsb.c b/src/rtl_adsb.c index e611e78..07fdd2a 100644 --- a/src/rtl_adsb.c +++ b/src/rtl_adsb.c @@ -96,6 +96,7 @@ void usage(void) "\t[-e allowed_errors (default: 5)]\n" "\t[-g tuner_gain (default: automatic)]\n" "\t[-p ppm_error (default: 0)]\n" + "\t[-T enable bias-T on GPIO PIN 0 (works for rtl-sdr.com v3 dongles)]\n" "\tfilename (a '-' dumps samples to stdout)\n" "\t (omitting the filename also uses stdout)\n\n" "Streaming with netcat:\n" @@ -371,11 +372,12 @@ int main(int argc, char **argv) int dev_index = 0; int dev_given = 0; int ppm_error = 0; + int enable_biastee = 0; pthread_cond_init(&ready, NULL); pthread_mutex_init(&ready_m, NULL); squares_precompute(); - while ((opt = getopt(argc, argv, "d:g:p:e:Q:VS")) != -1) + while ((opt = getopt(argc, argv, "d:g:p:e:Q:VST")) != -1) { switch (opt) { case 'd': @@ -400,6 +402,9 @@ int main(int argc, char **argv) case 'Q': quality = (int)(atof(optarg) * 10); break; + case 'T': + enable_biastee = 1; + break; default: usage(); return 0; @@ -470,6 +475,10 @@ int main(int argc, char **argv) /* Set the sample rate */ verbose_set_sample_rate(dev, ADSB_RATE); + rtlsdr_set_bias_tee(dev, enable_biastee); + if (enable_biastee) + fprintf(stderr, "activated bias-T on GPIO PIN 0\n"); + /* Reset endpoint before we start reading from it (mandatory) */ verbose_reset_buffer(dev); diff --git a/src/rtl_fm.c b/src/rtl_fm.c index e89e42d..d2d011a 100644 --- a/src/rtl_fm.c +++ b/src/rtl_fm.c @@ -193,6 +193,7 @@ void usage(void) "\t raw mode outputs 2x16 bit IQ pairs\n" "\t[-s sample_rate (default: 24k)]\n" "\t[-d device_index (default: 0)]\n" + "\t[-T enable bias-T on GPIO PIN 0 (works for rtl-sdr.com v3 dongles)]\n" "\t[-g tuner_gain (default: automatic)]\n" "\t[-l squelch_level (default: 0/off)]\n" //"\t for fm squelch is inverted\n" @@ -1042,12 +1043,13 @@ int main(int argc, char **argv) int r, opt; int dev_given = 0; int custom_ppm = 0; + int enable_biastee = 0; dongle_init(&dongle); demod_init(&demod); output_init(&output); controller_init(&controller); - while ((opt = getopt(argc, argv, "d:f:g:s:b:l:o:t:r:p:E:F:A:M:h")) != -1) { + while ((opt = getopt(argc, argv, "d:f:g:s:b:l:o:t:r:p:E:F:A:M:hT")) != -1) { switch (opt) { case 'd': dongle.dev_index = verbose_device_search(optarg); @@ -1142,6 +1144,9 @@ int main(int argc, char **argv) demod.deemph = 1; demod.squelch_level = 0;} break; + case 'T': + enable_biastee = 1; + break; case 'h': default: usage(); @@ -1205,6 +1210,10 @@ int main(int argc, char **argv) verbose_gain_set(dongle.dev, dongle.gain); } + rtlsdr_set_bias_tee(dongle.dev, enable_biastee); + if (enable_biastee) + fprintf(stderr, "activated bias-T on GPIO PIN 0\n"); + verbose_ppm_set(dongle.dev, dongle.ppm_error); if (strcmp(output.filename, "-") == 0) { /* Write samples to stdout */ diff --git a/src/rtl_power.c b/src/rtl_power.c index aa7a138..00f4d9f 100644 --- a/src/rtl_power.c +++ b/src/rtl_power.c @@ -133,6 +133,7 @@ void usage(void) "\t[-d device_index (default: 0)]\n" "\t[-g tuner_gain (default: automatic)]\n" "\t[-p ppm_error (default: 0)]\n" + "\t[-T enable bias-T on GPIO PIN 0 (works for rtl-sdr.com v3 dongles)]\n" "\tfilename (a '-' dumps samples to stdout)\n" "\t (omitting the filename also uses stdout)\n" "\n" @@ -771,6 +772,7 @@ int main(int argc, char **argv) int single = 0; int direct_sampling = 0; int offset_tuning = 0; + int enable_biastee = 0; double crop = 0.0; char *freq_optarg; time_t next_tick; @@ -781,7 +783,7 @@ int main(int argc, char **argv) double (*window_fn)(int, int) = rectangle; freq_optarg = ""; - while ((opt = getopt(argc, argv, "f:i:s:t:d:g:p:e:w:c:F:1PDOh")) != -1) { + while ((opt = getopt(argc, argv, "f:i:s:t:d:g:p:e:w:c:F:1PDOhT")) != -1) { switch (opt) { case 'f': // lower:upper:bin_size freq_optarg = strdup(optarg); @@ -849,6 +851,9 @@ int main(int argc, char **argv) boxcar = 0; comp_fir_size = atoi(optarg); break; + case 'T': + enable_biastee = 1; + break; case 'h': default: usage(); @@ -925,6 +930,10 @@ int main(int argc, char **argv) verbose_ppm_set(dev, ppm_error); + rtlsdr_set_bias_tee(dev, enable_biastee); + if (enable_biastee) + fprintf(stderr, "activated bias-T on GPIO PIN 0\n"); + if (strcmp(filename, "-") == 0) { /* Write log to stdout */ file = stdout; #ifdef _WIN32 diff --git a/src/rtl_tcp.c b/src/rtl_tcp.c index 317e0f3..7925da7 100644 --- a/src/rtl_tcp.c +++ b/src/rtl_tcp.c @@ -78,6 +78,7 @@ typedef struct { /* structure size must be multiple of 2 bytes */ static rtlsdr_dev_t *dev = NULL; +static int enable_biastee = 0; static int global_numq = 0; static struct llist *ll_buffers = 0; static int llbuf_num = 500; @@ -95,7 +96,8 @@ void usage(void) "\t[-b number of buffers (default: 15, set by library)]\n" "\t[-n max number of linked list buffers to keep (default: 500)]\n" "\t[-d device index (default: 0)]\n" - "\t[-P ppm_error (default: 0)]\n"); + "\t[-P ppm_error (default: 0)]\n" + "\t[-T enable bias-T on GPIO PIN 0 (works for rtl-sdr.com v3 dongles)]\n"); exit(1); } @@ -391,7 +393,7 @@ int main(int argc, char **argv) struct sigaction sigact, sigign; #endif - while ((opt = getopt(argc, argv, "a:p:f:g:s:b:n:d:P:")) != -1) { + while ((opt = getopt(argc, argv, "a:p:f:g:s:b:n:d:P:T")) != -1) { switch (opt) { case 'd': dev_index = verbose_device_search(optarg); @@ -421,6 +423,9 @@ int main(int argc, char **argv) case 'P': ppm_error = atoi(optarg); break; + case 'T': + enable_biastee = 1; + break; default: usage(); break; @@ -491,6 +496,10 @@ int main(int argc, char **argv) fprintf(stderr, "Tuner gain set to %f dB.\n", gain/10.0); } + rtlsdr_set_bias_tee(dev, enable_biastee); + if (enable_biastee) + fprintf(stderr, "activated bias-T on GPIO PIN 0\n"); + /* Reset endpoint before we start reading from it (mandatory) */ r = rtlsdr_reset_buffer(dev); if (r < 0) -- 2.1.4