Now I am really close, the latest fix for ROM_TABLES did the trick!
I am having an issue with tuning the frequency, following the PLL not
locked messages.
Is this also happening to anyone else? The rtl_test tool also shows
the same messages,
but I also see other people's forum postings who run the rtl-sdr
software successfully, even
with this kind of error message appearing.
# CellSearch --freq-start 791e6 --freq-end 821e6
LTE CellSearch v0.1.0 (release) beginning
Search frequency range: 791-821 MHz
PPM: 100
correction: 1
Found Elonics E4000 tuner
[E4K] PLL not locked for 791000000 Hz!
Error: unable to set center frequency
# rtl_test -t
Found 1 device(s):
0: Terratec T Stick PLUS
Using device 0: Terratec T Stick PLUS
Found Elonics E4000 tuner
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0
21.5 24.0 29.0 34.0 42.0
Benchmarking E4000 PLL...
[E4K] PLL not locked for 51000000 Hz!
[E4K] PLL not locked for 2175000000 Hz!
[E4K] PLL not locked for 1088000000 Hz!
[E4K] PLL not locked for 1232000000 Hz!
E4K range: 52 to 2174 MHz
E4K L-band gap: 1088 to 1232 MHz