Thanks mate, with your patch its working all right :-)
With Tom, we talked about a feature wich would be nice to have: a 10ms trigger so we can
see something like this:
http://tsou.cc/lte/openlte-spectro.png
What do you think about it?
Regards,
Csaba
----- Original Message -----
From: "Sylvain Munaut" <tnt(a)246tnt.com>
To: "Sipos Csaba" <sipos.csaba(a)kvk.uni-obuda.hu>
Cc: osmocom-sdr(a)lists.osmocom.org, "Sylvain Munaut" <tnt(a)246tnt.com>
Sent: Friday, February 27, 2015 11:19:06 AM
Subject: Re: gr-fosphor: error: work group size exceeds the maximum default value for the
selected device (AMD HD 5450)
Hi,
I just compiled gr-fosphor on a PC equipped with a HD
5450 card, and when I try to run osmocom_fft -F I gut the following error:
[+] Selected device: Cedar
Build log for 'display.cl':
"/tmp/OCL2287T8.cl", line 67: error: work group size exceeds the maximum
default value for the selected device
__attribute__((reqd_work_group_size(16, 16, 1)))
^
1 error detected in the compilation of "/tmp/OCL2287T8.cl".
Frontend phase failed compilation.
Yes, that card only suppot 128 as a maximum work group size and
fosphor is written to use 256. I think this particular generation of
card is the only one that's new enough to support OpenCL but old
enough to not support WG of 256.
I did however write a patch to support it a while back and just never
bothered to clean it up (to select size dynamically depending on your
card).
Try the attached patch and see if it works for you.
Cheers,
Sylvain