He sent me two frequencies in private email. These were in the FM
broadcast band (in the US). He probably needs to notch them out
in order to get adequate response.
As for wanting narrow bandwidth - I am not quite sure why he thinks
that is a benefit. I use a large FFT (about 10 Hz per bin) and use
the zoom control to see fine detail. (Different FFT settings suite
different uses. This one seems to be a good compromise with my two
needs. I'm too lazy to change it.)
{^_^}
On 2013/10/22 02:08, Sylvain Munaut wrote:
Effective
filtering must occur between antenna and receiver. All the
problems that a saturated preamp and ADC cause can’t be repaired by
software. Never.
But his original problem is not with saturated preamps or ADC ... it's
aliasing ... and that can be solved in the digital domain provided
fast enough ADC.
Cheers,
Sylvain