[osmocom-analog] Re: Help with cable connection from the phone to the SDR.

To safely connect your phone to the SDR for your TACS base station, you will need an appropriate load or attenuator to prevent damage. A typical approach is to use a 50-ohm load or an attenuator rated for the frequency range you are working with. Look for a 10-20 dB attenuator, as this should sufficiently reduce the signal strength to prevent frying the devices. Ensure that the attenuator can handle the power levels involved. It’s also advisable to double-check the specifications of both the phone and SDR to ensure compatibility. Good luck with your project! https://geometrydashmeltdown2.io