On Sat, Aug 08, 2009 at 02:03:06PM +0400, Sergey V. Efimov wrote:
I've compiled mISDN module into kernel and it
loads with
hfcmulti.dslot=1 parameter.
I think there is no difference between dynamically loadable module
and statically compiled in.
Also when I did not provide this parameter, nothing worked at all.
Is there any issues regarding processor architecture? I use AMD64
platform, though
the system (Debian) has i386 architecture working in compatibility mode.
I'm using both debian on 32bit and 64bit.
Your problem might be related to the actual cabling. I believe it is
definitely a layer1 (cabling) or layer 2 (mISDN) problem.
I don't really know any other advice but to double-check the cabling, the
jumpers on the E1 board as well as the termination jumpers on the BS-11.
Everything has to be set to 120 Ohms.
--
- Harald Welte <laforge(a)gnumonks.org>
http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)