Just now I looked at the failures in ttcn3-bsc-test-latest. https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-latest/ TL;DR: we should roll a release. Two real failures happen that are actual bugs in the latest release, and the rest of the failures are due to the lingering subscriber leak. BSC_Tests.TC_ho_into_this_bsc fails because osmo-bsc-latest omits the 'Codec List (BSS Supported)' in the Handover Request Acknowledge message, which is mandatory on AoIP. This error is fixed on osmo-bsc master. It makes no sense to me to punch a hole in the tests for latest -- this failure shows a real failure of the current osmo-bsc release. BSC_Tests.TC_cm_service_during_lcs_loc_req shows a subscriber leak, where a bsc_subscr is not cleaned up. This bsc_subscr lingers all the way to the end of the BSC_Tests run, and all other current failures of ttcn3-bsc-test-latest are due to that. (The only one not failing is TC_refuse_chan_act_to_vamos(), because it is the only one not verifying that no bsc_subscr stay behind.) So this also shows a real error in the current osmo-bsc release. There is nothing I would do at this point to make bsc-test-latest appear to be passing, because the errors shown are errors. The conclusion is that it might be time to roll another release one of these days. Related: important fixes I recently submitted are all merged to master, so from my side it would be a good time. ~N -- - Neels Hofmeyr <nhofmeyr@sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschäftsführer / Managing Directors: Harald Welte