Hi Dieter,
Am Do, 19.03.2009, 13:03, schrieb Dieter Spaar:
Hello Holger,
On Thu, 19 Mar 2009 11:02:05 +0100 (CET), "Holger Adams"
<holger(a)kernreaktor.org> wrote:
I am not familiar with the K1103. But if I don't misunderstand the traces,
everything should be fine. After the database has been sent to the BS-11,
you won't see any additional traffic on the E1 interface as long as there
is no phone registering to the BS-11 or you advice OpenBSC to send
something
to the BS-11. You should now be able to see the network with a phone.
If you want to generate some E1 traffic without a phone, you can
press (or release) the instrusion switch, this should result in a report
sent from the BS-11. However I don't know how long the delay is between
actually changing the switch state and the resulting report.
Hm, I pressed the intrusion switch but 'openbsc' didn't report it. Here's
the logfile with all debug options enabled:
http://www.kernreaktor.org/stuff/bs11_bschack_debug.txt
The programm stucks at 'TX TEI(1): 10 1a 1e 06 0b 00 0b 06 1e 00 01 00 f1
10 00 01 28 ff' but continues playing LAPD-RR-Pingpong. Should I try to
reflash the firmware? I also tried restarting 'openbsc' a few times.
Best Regards,
Holger