Hi there! I just got a nanobts, this if my first time using openBSC. Here is some info: System: gsm@debian:~/osmo_src/bin$ uname -a Linux debian 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26) x86_64 GNU/Linux SETTING IP's: /gsm@debian:~/osmo_src/bin$ ./ipaccess-config -o 10.1.121.1 10.1.121.151// //ipaccess-config (C) 2009-2010 by Harald Welte and others// //This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY/ /Trying to connect to ip.access BTS ...// //<0005> ../../../src/libbsc/abis_nm.c:381 OC=SITE-MANAGER(00) INST=(ff,ff,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=BTS(01) INST=(00,ff,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //OML link established using TRX 0// //setting primary OML link IP to '10.1.121.1'// //<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03) INST=(00,00,00) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03) INST=(00,00,01) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03) INST=(00,00,02) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03) INST=(00,00,03) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03) INST=(00,00,04) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03) INST=(00,00,05) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03) INST=(00,00,06) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=CHANNEL(03) INST=(00,00,07) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=RADIO-CARRIER(02) INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=GPRS-NSE(f0) INST=(00,ff,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=GPRS-CELL(f1) INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=GPRS-NSVC(f2) INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:381 OC=GPRS-NSVC(f2) INST=(00,01,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked // //<0005> ../../../src/libbsc/abis_nm.c:2599 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) IPACCESS(0xf0): SET NVATTR ACK// //Set the NV Attributes.// //gsm@debian:~/osmo_src/bin$ / FINDING BTS: /gsm@debian:~/osmo_src/bin$ sudo ./abisip-find enp0s3// //abisip-find (C) 2009 by Harald Welte// //This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY/ /Trying to find ip.access BTS by broadcast UDP...// //MAC_Address='00:02:95:00:41:2a' IP_Address='10.1.121.151' Unit_ID='20800/0/0' Location_1='' Location_2='BTS_NBT131G' Equipment_Version='140_029_59' Software_Version='120a002_v200b24d0' Unit_Name='nbts-00-02-95-00-41-2A' Serial_Number='00073914' / CONFIG: ! ! OpenBSC configuration saved from vty ! ! password foo ! line vty no login ! e1_input e1_line 0 driver ipa network network country code 334 mobile network code 020 short name AlgoOpenBSC long name OpenBSC auth policy accept-all location updating reject cause 13 encryption a5 0 neci 1 rrlp mode none mm info 1 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 timer t3101 10 timer t3103 0 timer t3105 0 timer t3107 0 timer t3109 4 timer t3111 0 timer t3113 60 timer t3115 0 timer t3117 0 timer t3119 0 timer t3141 0 bts 0 type nanobts band DCS1800 cell_identity 0 location_area_code 1 training_sequence_code 7 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 channel allocator ascending rach tx integer 9 rach max transmission 7 ip.access unit_id 20800 0 oml ip.access stream_id 255 line 0 gprs mode none trx 0 rf_locked 0 arfcn 514 nominal power 23 max_power_red 20 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 timeslot 1 phys_chan_config SDCCH8 timeslot 2 phys_chan_config TCH/F timeslot 3 phys_chan_config TCH/F timeslot 4 phys_chan_config TCH/F timeslot 5 phys_chan_config TCH/F timeslot 6 phys_chan_config TCH/F timeslot 7 phys_chan_config TCH/F OUTPUT: /gsm@debian:~/osmo_src/bin$ ./osmo-nitb// //<001e> ../../../src/vty/telnet_interface.c:102 telnet at 127.0.0.1 4242// //<0005> ../../../src/libbsc/bsc_init.c:465 // //WARNING: You are running an 'accept-all' network on a BTS that is not barred. This configuration is likely to interfere with production GSM networks and should only be used in a RF shielded environment such as a faraday cage!// // //<0020> ../../src/input/ipaccess.c:846 enabling ipaccess BSC mode on 0.0.0.0 with OML 3002 and RSL 3003 TCP ports// //<0017> ../../../src/libmsc/smpp_smsc.c:1001 SMPP at 0.0.0.0 2775// //<0025> ../../../src/ctrl/control_if.c:788 CTRL at 127.0.0.1 4249// //DB: Database initialized.// //DB: Database prepared.// //<0020> ../../src/input/ipa.c:263 accept()ed new link from 10.1.121.151 to port 3002// //Getting attributes from BTS0 type nanobts is not supported.// //Getting attributes from BTS0 type nanobts is not supported.// //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM:ULM_FIFODRV:fifodrv.c#1864 (6082). // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0TxQueue full. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM ra=080036ae sp=40017a38. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [400179e8] |4000b518|00000000|08000af0|08000998|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [400179f8] |20000093|080007e8|00000000|00000093|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [40017a08] |40017b58|40003c64|00000000|00000000|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [40017a18] |80380000|00000000|40003c64|08002d8b|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [40017a28] |00000000|40017a38|40004a7c|40017a90|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [40017a38] |00000000|40017ab0|080595b8|00000002|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [40017a48] |40006fbc|0800762f|40017ac4|08059a78|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [40017a58] |0000000d|40007098|400047d8|40017a88|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [40017a68] |00000001|00000000|080417f8|00000000|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULM [40017a78] |0800c321|40017b58|08007c45|40000093|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS:ULS_FIFODRV:fifodrv.c#1864 (7540). // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0TxQueue full. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS ra=08011da8 sp=4000c7c8. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c778] |4000c784|08000af0|080012d8|000000b3|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c788] |c0000000|00001950|00000050|00000040|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c798] |00000000|00000001|40000093|400032c0|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c7a8] |00000000|00000000|80380000|00000000|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c7b8] |60000093|4000c7c8|08011da9|08011da8|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c7c8] |40003b10|4000c7e0|400000d3|08000c14|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c7d8] |0800a900|55555555|40003b40|4000d288|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c7e8] |50036300|400049c4|00000000|00000000|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c7f8] |00000000|00000000|00000000|00000000|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0ULS [4000c808] |00000000|00000000|08011d8b|4000c77c|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP:L2_BCH:l2_bch.c#1065 (2586). // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0BCHbcchSItypeValid( prim_p->infoType ). // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP ra=0801446c sp=4000d724. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d6d4] |4000d6e0|08000af0|080012d8|000000b3|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d6e4] |c0000000|00001950|00000050|00000040|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d6f4] |00000000|00000001|40000093|40003bb8|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d704] |00000000|00000000|80380000|00000000|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d714] |60000093|4000d724|0801446d|0801446c|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d724] |400049d8|4000d73c|400000d3|08000c14|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d734] |0800a900|55555555|40004a08|4000e1e4|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d744] |50036300|4000588c|00000000|00000000|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d754] |00000000|00000000|00000000|00000000|. // //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=(Logged). :0DLP [4000d764] |00000000|00000000|0801444f|4000d6d8|. // //<0020> ../../src/input/ipa.c:263 accept()ed new link from 10.1.121.151 to port 3003// //<0004> ../../../src/libbsc/bsc_init.c:311 bootstrapping RSL for BTS/TRX (0/0) on ARFCN 514 using MCC=334 MNC=20 LAC=1 CID=0 BSIC=63// //BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Process stopped, Additional Text=lme_manage_fsm_actions.c:636IPC Ping timeout - DLP FAILED. // //BTS 0: Failure Event Report: Type=processing failure, Severity=warning level failure, Probable cause=Manufacturer specific values: Software warning, Additional Text=38454:WARN:OAM_RES:res_trx_status.c#209:TRX is not responding - reinitialising . // //BTS 0: Failure Event Report: Type=processing failure, Severity=warning level failure, Probable cause=Manufacturer specific values: Software warning, Additional Text=FSM Unhandled Event class=Baseband Transceiver inst=0 ev="DISABLED RSP" st=ini. // //BTS 0: Failure Event Report: Type=processing failure, Severity=warning level failure, Probable cause=Manufacturer specific values: Software warning, Additional Text=FSM Unhandled Event class=Radio Carrier inst=0 ev="DISABLED RSP" st=initial// //. // //BTS 0: Failure Event Report: Type=processing failure, Severity=warning level failure, Probable cause=Manufacturer specific values: Software warning, Additional Text=FSM Unhandled Event class=Baseband Transceiver inst=0 ev="CLEAR I REQ" st=init. // //<0020> ../../src/input/ipaccess.c:241 Sign link vanished, dead socket// //<0020> ../../src/input/ipaccess.c:69 Forcing socket shutdown with no signal link set/