Hi there! I just got a nanobts, this if my first time using openBSC.
Here is some info:
System:
gsm@debian:~/osmo_src/bin$ uname -a
Linux debian 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u2
(2017-06-26) x86_64 GNU/Linux
SETTING IP's:
gsm@debian:~/osmo_src/bin$ ./ipaccess-config -o
10.1.121.1 10.1.121.151
ipaccess-config (C) 2009-2010 by Harald Welte and others
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
Trying to connect to ip.access BTS ...
<0005> ../../../src/libbsc/abis_nm.c:381
OC=SITE-MANAGER(00) INST=(ff,ff,ff) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07)
<0005> ../../../src/libbsc/abis_nm.c:381 OC=BTS(01)
INST=(00,ff,ff) STATE CHG: OP_STATE=Disabled AVAIL=Not
installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
OML link established using TRX 0
setting primary OML link IP to '10.1.121.1'
<0005> ../../../src/libbsc/abis_nm.c:381
OC=CHANNEL(03) INST=(00,00,00) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=CHANNEL(03) INST=(00,00,01) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=CHANNEL(03) INST=(00,00,02) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=CHANNEL(03) INST=(00,00,03) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=CHANNEL(03) INST=(00,00,04) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=CHANNEL(03) INST=(00,00,05) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=CHANNEL(03) INST=(00,00,06) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=CHANNEL(03) INST=(00,00,07) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=RADIO-CARRIER(02) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=GPRS-NSE(f0) INST=(00,ff,ff) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=GPRS-CELL(f1) INST=(00,00,ff) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=GPRS-NSVC(f2) INST=(00,00,ff) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:381
OC=GPRS-NSVC(f2) INST=(00,01,ff) STATE CHG: OP_STATE=Disabled
AVAIL=Not installed(07) ADM=Locked
<0005> ../../../src/libbsc/abis_nm.c:2599
OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) IPACCESS(0xf0): SET
NVATTR ACK
Set the NV Attributes.
gsm@debian:~/osmo_src/bin$
FINDING BTS:
gsm@debian:~/osmo_src/bin$ sudo ./abisip-find enp0s3
abisip-find (C) 2009 by Harald Welte
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
Trying to find ip.access BTS by broadcast UDP...
MAC_Address='00:02:95:00:41:2a' IP_Address='10.1.121.151'
Unit_ID='20800/0/0' Location_1='' Location_2='BTS_NBT131G'
Equipment_Version='140_029_59'
Software_Version='120a002_v200b24d0'
Unit_Name='nbts-00-02-95-00-41-2A' Serial_Number='00073914'
CONFIG:
!
! OpenBSC configuration saved from vty
! !
password foo
!
line vty
no login
!
e1_input
e1_line 0 driver ipa
network
network country code 334
mobile network code 020
short name AlgoOpenBSC
long name OpenBSC
auth policy accept-all
location updating reject cause 13
encryption a5 0
neci 1
rrlp mode none
mm info 1
handover 0
handover window rxlev averaging 10
handover window rxqual averaging 1
handover window rxlev neighbor averaging 10
handover power budget interval 6
handover power budget hysteresis 3
handover maximum distance 9999
timer t3101 10
timer t3103 0
timer t3105 0
timer t3107 0
timer t3109 4
timer t3111 0
timer t3113 60
timer t3115 0
timer t3117 0
timer t3119 0
timer t3141 0
bts 0
type nanobts
band DCS1800
cell_identity 0
location_area_code 1
training_sequence_code 7
base_station_id_code 63
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
channel allocator ascending
rach tx integer 9
rach max transmission 7
ip.access unit_id 20800 0
oml ip.access stream_id 255 line 0
gprs mode none
trx 0
rf_locked 0
arfcn 514
nominal power 23
max_power_red 20
rsl e1 tei 0
timeslot 0
phys_chan_config CCCH+SDCCH4
timeslot 1
phys_chan_config SDCCH8
timeslot 2
phys_chan_config TCH/F
timeslot 3
phys_chan_config TCH/F
timeslot 4
phys_chan_config TCH/F
timeslot 5
phys_chan_config TCH/F
timeslot 6
phys_chan_config TCH/F
timeslot 7
phys_chan_config TCH/F
OUTPUT:
gsm@debian:~/osmo_src/bin$ ./osmo-nitb
<001e> ../../../src/vty/telnet_interface.c:102 telnet
at 127.0.0.1 4242
<0005> ../../../src/libbsc/bsc_init.c:465
WARNING: You are running an 'accept-all' network on a BTS
that is not barred. This configuration is likely to interfere
with production GSM networks and should only be used in a RF
shielded environment such as a faraday cage!
<0020> ../../src/input/ipaccess.c:846 enabling
ipaccess BSC mode on 0.0.0.0 with OML 3002 and RSL 3003 TCP
ports
<0017> ../../../src/libmsc/smpp_smsc.c:1001 SMPP at
0.0.0.0 2775
<0025> ../../../src/ctrl/control_if.c:788 CTRL at
127.0.0.1 4249
DB: Database initialized.
DB: Database prepared.
<0020> ../../src/input/ipa.c:263 accept()ed new link
from 10.1.121.151 to port 3002
Getting attributes from BTS0 type nanobts is not supported.
Getting attributes from BTS0 type nanobts is not supported.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0ULM:ULM_FIFODRV:fifodrv.c#1864 (6082).
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0TxQueue full.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
ra=080036ae sp=40017a38.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[400179e8] |4000b518|00000000|08000af0|08000998|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[400179f8] |20000093|080007e8|00000000|00000093|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a08] |40017b58|40003c64|00000000|00000000|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a18] |80380000|00000000|40003c64|08002d8b|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a28] |00000000|40017a38|40004a7c|40017a90|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a38] |00000000|40017ab0|080595b8|00000002|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a48] |40006fbc|0800762f|40017ac4|08059a78|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a58] |0000000d|40007098|400047d8|40017a88|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a68] |00000001|00000000|080417f8|00000000|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULM
[40017a78] |0800c321|40017b58|08007c45|40000093|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0ULS:ULS_FIFODRV:fifodrv.c#1864 (7540).
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0TxQueue full.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
ra=08011da8 sp=4000c7c8.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c778] |4000c784|08000af0|080012d8|000000b3|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c788] |c0000000|00001950|00000050|00000040|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c798] |00000000|00000001|40000093|400032c0|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7a8] |00000000|00000000|80380000|00000000|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7b8] |60000093|4000c7c8|08011da9|08011da8|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7c8] |40003b10|4000c7e0|400000d3|08000c14|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7d8] |0800a900|55555555|40003b40|4000d288|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7e8] |50036300|400049c4|00000000|00000000|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c7f8] |00000000|00000000|00000000|00000000|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0ULS
[4000c808] |00000000|00000000|08011d8b|4000c77c|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0DLP:L2_BCH:l2_bch.c#1065 (2586).
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged).
:0BCHbcchSItypeValid( prim_p->infoType ).
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
ra=0801446c sp=4000d724.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d6d4] |4000d6e0|08000af0|080012d8|000000b3|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d6e4] |c0000000|00001950|00000050|00000040|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d6f4] |00000000|00000001|40000093|40003bb8|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d704] |00000000|00000000|80380000|00000000|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d714] |60000093|4000d724|0801446d|0801446c|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d724] |400049d8|4000d73c|400000d3|08000c14|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d734] |0800a900|55555555|40004a08|4000e1e4|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d744] |50036300|4000588c|00000000|00000000|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d754] |00000000|00000000|00000000|00000000|.
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Fatal software error, Additional Text=(Logged). :0DLP
[4000d764] |00000000|00000000|0801444f|4000d6d8|.
<0020> ../../src/input/ipa.c:263 accept()ed new link
from 10.1.121.151 to port 3003
<0004> ../../../src/libbsc/bsc_init.c:311
bootstrapping RSL for BTS/TRX (0/0) on ARFCN 514 using MCC=334
MNC=20 LAC=1 CID=0 BSIC=63
BTS 0: Failure Event Report: Type=processing failure,
Severity=critical failure, Probable cause=Manufacturer specific
values: Process stopped, Additional
Text=lme_manage_fsm_actions.c:636IPC Ping timeout - DLP FAILED.
BTS 0: Failure Event Report: Type=processing failure,
Severity=warning level failure, Probable cause=Manufacturer
specific values: Software warning, Additional
Text=38454:WARN:OAM_RES:res_trx_status.c#209:TRX is not
responding - reinitialising .
BTS 0: Failure Event Report: Type=processing failure,
Severity=warning level failure, Probable cause=Manufacturer
specific values: Software warning, Additional Text=FSM Unhandled
Event class=Baseband Transceiver inst=0 ev="DISABLED RSP"
st=ini.
BTS 0: Failure Event Report: Type=processing failure,
Severity=warning level failure, Probable cause=Manufacturer
specific values: Software warning, Additional Text=FSM Unhandled
Event class=Radio Carrier inst=0 ev="DISABLED RSP" st=initial
.
BTS 0: Failure Event Report: Type=processing failure,
Severity=warning level failure, Probable cause=Manufacturer
specific values: Software warning, Additional Text=FSM Unhandled
Event class=Baseband Transceiver inst=0 ev="CLEAR I REQ"
st=init.
<0020> ../../src/input/ipaccess.c:241 Sign link
vanished, dead socket
<0020> ../../src/input/ipaccess.c:69 Forcing socket
shutdown with no signal link set