Thanks for your response Harald,
Well I read in the mailinglist with the title: BS-11 runs, but no
Network on my Mobile, date: Thu Apr 2 18:03:24 CEST 2009
about modifying the TRX power for the BS-11, so I could try that too for
the ip.acces?
Isn't it a bad idea to add abis_nm_bs11_set_trx_power(&bts->trx[0],
BS11_TRX_POWER_GSM_250mW); in the bootstrap sequence? It won't harm if
one tries right?
Harald Welte schreef:
On Thu, May 28, 2009 at 12:36:49PM +0200, Nordin
wrote:
Hello guys,
While I'm still busy with understanding the OpenBSC sourcecodes and GSM
protocols, I wonder if it's possible to control the nanoBTS's
transmissionpower. If some additional code is needed, I'd like to give a
try with some hints or directions to look at.
Unfortunately we don't know this, as we don't have the ip.access protocol
documentation. As far as I know, there is no standard command for altering
power levels.
You might be able to control the _initial_ BS power by setting some
TRX or BTS attributes related to that. But it is my understanding that after the
initial power level, the BS will adjust the power itself on every dedicated
channel.