On Mon, May 25, 2009 at 03:08:10PM +0200, Eric Cathelinaud wrote:
I didn't doanwload:
-the SAFETY LOAD software
-the BTS software
Is it necessary since I can reach Phase 3 and since I can see the Firmware
Code Number?
no, it is not. the firmware is completely installed on your system, otherwise the TRX0
would never get into 'Load"
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:125 alen =6, dev(0) channel(0)
sapi(63) tei(127)
Mon May 25 16:07:39 2009 <1000> input/misdn.c:128 <= len = 12, prim(0x8)
id(0x7f3f): DL_INFORMATION_IND
Mon May 25 16:07:39 2009 <1000> input/misdn.c:135 DL_INFORMATION_IND: use
channel(0) sapi(63) tei(127) for now
mISDN message for unknown sign_link
this basically means that the TEI manager was instantiated on the E1 link,
but no TEIs were established, most likely a layer 1 problem...
Regards,
--
- Harald Welte <laforge(a)gnumonks.org>
http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)