15 Jul
2016
15 Jul
'16
10:24 a.m.
Would you mind sharing your entire config?
Btw, dtx-used is indeed deprecated now - if you want to enable DTX use
dtxu or/and dtxd. If you don't know what DTX is than just remove this
line. Having said that, it should not prevent the startup. You might
want to check the documentation at
http://ftp.osmocom.org/docs/latest/
On 07/15/2016 02:41 AM, ayush gupta wrote:
Hello everyone,
i am noob to this field and currently trying to establishing a GSM
network with EDGE support
using this page as guide
http://openbsc.osmocom.org/trac/wiki/Ettus_USRP_B2xx_family#no1
i am stuck at this command
sudo osmo-nitb -C -c openbsc.conf -T -P -m
its giving me following error
There is no such command.
Error occurred during reading below line:
extension-prefix 0
% 'dtx-used' is now deprecated: use dtx * configuration options of BTS instead
Fri Jul 15 05:35:26 2016 <0005> bsc_init.c:492 Failed to parse the config file:
'/home/ryker/openbsc.conf'
any help would be highly appreciated
thanks
--
Max Suraev <msuraev(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte