9 Dec
2010
9 Dec
'10
2:17 p.m.
Hi Thomas,
On Tue, Dec 07, 2010 at 05:18:35PM +0100, Thomas Ansorg wrote:
the cables are built, now i want to use 2 bs11 in
multi drop config. how
do i connect the 2 bs11? the e1 comes from the pc to the 1st bs11 left
half, left tx, right rx(front view). now i'm on the right half: to which
port are the 2 bnc port from the 1st to the 2nd bs11 to be connected? i
tried the 2 possible combinations, didn't work (with the
openbsc.cfg.2-2). the 2 bs11 are both set to tei=25 (bs11_config told me
so)
Did you make sure that the two BTS use different timeslots, and those are
the same timeslots that appear in the
bts 0
oml e1 line 1 timeslot 1 sub-slot full
bts 1
oml e1 line 1 timeslot 6 sub-slot full
lines?
second problem: the timer instructions in the
openbsc.cfg.2-2 are not
executable, the bsc_hack program stops there. i had to remove them.
what's the matter with that, why don't these timer instructions work?
the config file format has changed since we last used the cfg.2-2, sorry
for that. Feel free to submit a patch after you made it work :)
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)