30 Jan
2017
30 Jan
'17
10:59 p.m.
hi dear
I install openbsc, osmosgsn, ggsn, osmo-trx, osmo-bts-trx, osmo-pcu and
dependency from master branch step by step from this link.
<https://osmocom.org/projects/cellular-infrastructure/wiki/OpenBSC_GPRS>
but when run osmo-nitb, osmo-trx and osmo-bts-trx, mobile connect to
network but no access to network.
(I used USRP N210 and B210, Ubuntu 15.10/16.10 x64)
osmo-nitb log:
20170130041914525 DRLL <0000> chan_alloc.c:352
(bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Allocating lchan=0 as SDCCH
20170130041914525 DRSL <0004> abis_rsl.c:1819 (bts=0,trx=0,ts=0,ss=0)
Activating ARFCN(0) SS(0) lctype SDCCH r=LOCATION_UPDATE ra=0x05 ta=0
20170130041914525 DRSL <0004> abis_rsl.c:580
(bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4)
Tx RSL Channel Activate with act_type=INITIAL
20170130041914525 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state
NONE -> ACTIVATION REQUESTED
20170130041914525 DRSL <0004> abis_rsl.c:1546 (bts=0,trx=0,ts=0,ss=0)
CHANNEL ACTIVATE ACK
20170130041914525 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state
ACTIVATION REQUESTED -> ACTIVE
20170130041924529 DRSL <0004> abis_rsl.c:852 (bts=0,trx=0,ts=0,ss=0) RF
Channel Release due to error: 1
20170130041924529 DRSL <0004> abis_rsl.c:762 (bts=0,trx=0,ts=0,ss=0)
DEACTivate SACCH CMD
20170130041924529 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state
ACTIVE -> RELEASE DUE ERROR
20170130041924530 DRSL <0004> abis_rsl.c:925 (bts=0,trx=0,ts=0,ss=0) RF
CHANNEL RELEASE ACK
20170130041926530 DRSL <0004> abis_rsl.c:811 (bts=0,trx=0,ts=0,ss=0) is
back in operation.
20170130041926531 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state
RELEASE DUE ERROR -> NONE
NITB config:
!
! OpenBSC (0.15.0.646-f1886-dirty) configuration saved from vty
!!
password foo
!
log stderr
logging filter all 1
logging color 1
logging print category 1
logging print extended-timestamp 1
logging level all everything
logging level rll debug
logging level cc debug
logging level mm info
logging level rr info
logging level rsl debug
logging level nm debug
logging level mncc debug
logging level pag debug
logging level meas notice
logging level sccp notice
logging level msc notice
logging level mgcp notice
logging level ho notice
logging level db notice
logging level ref notice
logging level gprs notice
logging level ns info
logging level bssgp notice
logging level llc notice
logging level sndcp notice
logging level nat notice
logging level ctrl notice
logging level smpp notice
logging level filter notice
logging level ranap debug
logging level sua debug
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
!
stats interval 5
!
line vty
no login
!
e1_input
e1_line 0 driver ipa
e1_line 0 port 0
no e1_line 0 keepalive
ipa bind 127.0.0.1
network
network country code 432
mobile network code 70
short name dynch
long name dynch
auth policy accept-all
authorized-regexp .*
location updating reject cause 13
encryption a5 0
neci 1
paging any use tch 0
rrlp mode none
mm info 1
handover 0
handover window rxlev averaging 10
handover window rxqual averaging 1
handover window rxlev neighbor averaging 10
handover power budget interval 6
handover power budget hysteresis 3
handover maximum distance 9999
timer t3101 10
timer t3103 0
timer t3105 0
timer t3107 0
timer t3109 4
timer t3111 0
timer t3113 60
timer t3115 0
timer t3117 0
timer t3119 0
timer t3122 10
timer t3141 0
subscriber-keep-in-ram 0
bts 0
type sysmobts
band GSM900
cell_identity 0
location_area_code 1
base_station_id_code 63
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
periodic location update 30
radio-link-timeout 32
channel allocator ascending
rach tx integer 9
rach max transmission 7
channel-descrption attach 1
channel-descrption bs-pa-mfrms 5
channel-descrption bs-ag-blks-res 1
early-classmark-sending forbidden
ip.access unit_id 1800 0
oml ip.access stream_id 255 line 0
neighbor-list mode automatic
codec-support fr
gprs mode gprs
gprs 11bit_rach_support_for_egprs 0
gprs routing area 0
gprs network-control-order nc1
gprs cell bvci 1800
gprs cell timer blocking-timer 3
gprs cell timer blocking-retries 3
gprs cell timer unblocking-retries 3
gprs cell timer reset-timer 3
gprs cell timer reset-retries 3
gprs cell timer suspend-timer 10
gprs cell timer suspend-retries 3
gprs cell timer resume-timer 10
gprs cell timer resume-retries 3
gprs cell timer capability-update-timer 10
gprs cell timer capability-update-retries 3
gprs nsei 1800
gprs ns timer tns-block 3
gprs ns timer tns-block-retries 3
gprs ns timer tns-reset 3
gprs ns timer tns-reset-retries 3
gprs ns timer tns-test 30
gprs ns timer tns-alive 3
gprs ns timer tns-alive-retries 10
gprs nsvc 0 nsvci 1800
gprs nsvc 0 local udp port 23000
gprs nsvc 0 remote udp port 23000
gprs nsvc 0 remote ip 127.0.0.1
gprs nsvc 1 nsvci 0
gprs nsvc 1 local udp port 0
gprs nsvc 1 remote udp port 0
gprs nsvc 1 remote ip 0.0.0.0
no force-combined-si
trx 0
rf_locked 0
arfcn 0
nominal power 23
max_power_red 0
rsl e1 tei 0
timeslot 0
phys_chan_config CCCH+SDCCH4
hopping enabled 0
timeslot 1
phys_chan_config TCH/F
hopping enabled 0
timeslot 2
phys_chan_config TCH/F
hopping enabled 0
timeslot 3
phys_chan_config TCH/F
hopping enabled 0
timeslot 4
phys_chan_config PDCH
hopping enabled 0
timeslot 5
phys_chan_config PDCH
hopping enabled 0
timeslot 6
phys_chan_config PDCH
hopping enabled 0
timeslot 7
phys_chan_config PDCH
hopping enabled 0
mncc-int
default-codec tch-f fr
default-codec tch-h hr
nitb
subscriber-create-on-demand
assign-tmsi
OSMO-BTS-TRX Config file
!
! OsmoBTS (0.4.0.372-f65b) configuration saved from vty
!!
!
log stderr
logging filter all 1
logging color 0
logging print category 1
logging print extended-timestamp 1
logging level all everything
logging level rsl debug
logging level oml debug
logging level rll notice
logging level rr notice
logging level meas notice
logging level pag info
logging level l1c debug
logging level l1p info
logging level dsp debug
logging level pcu notice
logging level ho notice
logging level trx notice
logging level loop notice
logging level abis notice
logging level rtp notice
logging level sum notice
logging level lglobal notice
logging level llapd debug
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
!
line vty
no login
!
e1_input
e1_line 0 driver ipa
e1_line 0 port 0
no e1_line 0 keepalive
phy 0
osmotrx ip 127.0.0.1
osmotrx fn-advance 20
osmotrx rts-advance 5
osmotrx tx-attenuation oml
instance 0
bts 0
band GSM900
ipa unit-id 1800 0
oml remote-ip 127.0.0.1
rtp jitter-buffer 100
paging queue-size 200
paging lifetime 0
uplink-power-target -75
min-qual-rach 50
min-qual-norm -5
no ms-power-loop
timing-advance-loop
trx 0
power-ramp max-initial 23000 mdBm
power-ramp step-size 2000 mdB
power-ramp step-interval 1
ms-power-control dsp
phy 0 instance 0
Regards!
openbsc(a)lists.osmocom.org