Hi Neels,
Looking into your configuration, I managed to start sgsn,ggsn,nitb and pcu
without error. However, When I look into the pcu running configuration I
see that there is a different configuration from the starting one ( no
egprs ), is this normal? I changed it to egprs. Another issue that I faced
yesterday, was that I could connect my phone to the network (this one time,
today I was trying to connect but it didnt connected), and the symbol of
GPRS appeared, but couldnt make a ping to 8.8.8.8 for example, even after
doing the nat masquerade thing.
I see in the vty sgsn that my phone does several routing area update, but
does not connect. what it could be?
Here is my configuration attached, I am running everything on sysmo2050.
Best,
Marcus Dias
UFPA - Lasse - LaPS
2017-07-06 23:14 GMT-03:00 Neels Hofmeyr <nhofmeyr(a)sysmocom.de>de>:
On Thu, Jul 06, 2017 at 04:54:07PM -0300, Marcus Dias
wrote:
Dear all,
I have one sysmo2050, with the GSM running fine. However, i would like to
test GPRS data transmission, I was following this setup page (
https://osmocom.org/projects/cellular-infrastructure/wiki/
OpenBSC_GPRS#OpenBSC-configuration),
but i couldnt make it work. Anyone has done it
before / can help me?
Hard to help with this little information.
I have attached a tar with scripts and configs I use to run voice and data
on a
sysmoBTS. Note that this is a rather convoluted way that fits my personal
needs
of development testing. Maybe you can figure something out from it...
Feel free to ask more specific questions here, including your config and
error
symptoms.
~N