osmotrx init problem

Hi. I've got following problem while trying to make osmotrx work in multitrx setting on USRP B210: sudo chrt 20 ./Transceiver52M/osmo-trx -c 2 sudo chrt 15 ./src/osmo-bts-trx/osmo-bts-trx -t 2 -c ~/.config/osmocom/osmo-bts-mtrx.cfg -d DRTP:DCC:DRSL:DOML:DL1C:DTRX The bts quits from trx_if.c after checking "if (tcm->critical) {...". The command sequence seems to be the same for both phy0.0 and phy0.1 However 0.0 one accepts SETTSC command and 0.1 rejects it: trx_if.c:380 transceiver (phy0.1) rejected TRX command with response: 'RSP SETTSC 1 7' So far I fail to see where this difference comes from. Full log: <0001> oml.c:1249 Initializing OML attribute definitions <000b> trx_if.c:560 Open transceiver for phy0.0 <000b> trx_if.c:222 Adding new control 'CMD POWEROFF' <000b> trx_if.c:169 Sending control 'CMD POWEROFF' to phy0.0 <000b> trx_if.c:560 Open transceiver for phy0.1 <000b> trx_if.c:348 Response message: 'RSP POWEROFF 0' <0001> oml.c:547 Ignoring T200[0] (150 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[1] (180 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[2] (180 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[3] (1680 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[4] (520 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[5] (165 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[6] (1680 ms) as sent by BSC due to suspected LAPDm bug! <000b> trx_if.c:222 Adding new control 'CMD POWEROFF' <000b> trx_if.c:169 Sending control 'CMD POWEROFF' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP POWEROFF 0' <0001> oml.c:884 ADM state already was Unlocked <000b> trx_if.c:222 Adding new control 'CMD RXTUNE 1783400' <000b> trx_if.c:169 Sending control 'CMD RXTUNE 1783400' to phy0.0 <000b> trx_if.c:222 Adding new control 'CMD TXTUNE 1878400' <000b> trx_if.c:222 Adding new control 'CMD SETTSC 7' <000b> trx_if.c:222 Adding new control 'CMD POWERON' <000b> trx_if.c:222 Adding new control 'CMD SETRXGAIN 1' <000b> trx_if.c:222 Adding new control 'CMD SETPOWER 0' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 0 4' <0005> paging.c:545 Paging: BS_AG_BLKS_RES = 0 != 1 not fully supported <000b> trx_if.c:348 Response message: 'RSP RXTUNE 0 1783400' <000b> trx_if.c:169 Sending control 'CMD TXTUNE 1878400' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP TXTUNE 0 1878400' <000b> trx_if.c:169 Sending control 'CMD SETTSC 7' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETTSC 0 7' <000b> trx_if.c:169 Sending control 'CMD POWERON' to phy0.0 <0005> paging.c:545 Paging: BS_AG_BLKS_RES = 0 != 1 not fully supported <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 1 7' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 2 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 3 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 4 13' <000b> trx_if.c:348 Response message: 'RSP POWERON 0' <000b> trx_if.c:169 Sending control 'CMD SETRXGAIN 1' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETRXGAIN 0 1' <000b> trx_if.c:169 Sending control 'CMD SETPOWER 0' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETPOWER 0 0' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 0 4' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 0 4' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 1 7' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 1 7' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 2 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 2 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 3 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 3 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 4 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 4 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 5 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 5 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 5 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 6 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 6 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 6 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 7 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 7 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 7 13' <0001> oml.c:884 ADM state already was Unlocked <000b> trx_if.c:222 Adding new control 'CMD RXTUNE 1783800' <000b> trx_if.c:169 Sending control 'CMD RXTUNE 1783800' to phy0.1 <000b> trx_if.c:222 Adding new control 'CMD TXTUNE 1878800' <000b> trx_if.c:222 Adding new control 'CMD SETTSC 7' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 0 7' <000b> trx_if.c:348 Response message: 'RSP RXTUNE 0 1783800' <000b> trx_if.c:169 Sending control 'CMD TXTUNE 1878800' to phy0.1 <000b> trx_if.c:348 Response message: 'RSP TXTUNE 0 1878800' <000b> trx_if.c:169 Sending control 'CMD SETTSC 7' to phy0.1 <000b> trx_if.c:348 Response message: 'RSP SETTSC 1 7' <000b> trx_if.c:380 transceiver (phy0.1) rejected TRX command with response: 'RSP SETTSC 1 7' <0001> bts.c:203 Shutting down BTS 0, Reason TRX-CTRL-MSG: CRITICAL <000b> trx_if.c:222 Adding new control 'CMD POWEROFF' <000b> trx_if.c:169 Sending control 'CMD POWEROFF' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP POWEROFF 0' <0001> oml.c:547 Ignoring T200[0] (150 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[1] (180 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[2] (180 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[3] (1680 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[4] (520 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[5] (165 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:547 Ignoring T200[6] (1680 ms) as sent by BSC due to suspected LAPDm bug! <0001> oml.c:884 ADM state already was Unlocked <000b> trx_if.c:222 Adding new control 'CMD POWERON' <000b> trx_if.c:169 Sending control 'CMD POWERON' to phy0.0 <000b> trx_if.c:222 Adding new control 'CMD SETRXGAIN 1' <000b> trx_if.c:222 Adding new control 'CMD SETPOWER 0' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 0 4' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 1 7' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 2 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 3 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 4 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 5 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 6 13' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 7 13' <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <000b> trx_if.c:348 Response message: 'RSP POWERON 0' <000b> trx_if.c:169 Sending control 'CMD SETRXGAIN 1' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETRXGAIN 0 1' <000b> trx_if.c:169 Sending control 'CMD SETPOWER 0' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETPOWER 0 0' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 0 4' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 0 4' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 1 7' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 1 7' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 2 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 2 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 3 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 3 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 4 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 4 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 5 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 5 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 6 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 6 13' <000b> trx_if.c:169 Sending control 'CMD SETSLOT 7 13' to phy0.0 <000b> trx_if.c:348 Response message: 'RSP SETSLOT 0 7 13' <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 0 7' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 1 1' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 2 1' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 3 1' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 4 1' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 5 1' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 6 1' <000b> trx_if.c:222 Adding new control 'CMD SETSLOT 7 1' <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <0001> oml.c:884 ADM state already was Unlocked <000b> trx_if.c:138 Clock indication: fn=999376 <000b> trx_if.c:470 TX burst tn=0 fn=999396 pwr=0 <000b> trx_if.c:470 TX burst tn=1 fn=999396 pwr=0 <000b> trx_if.c:470 TX burst tn=2 fn=999396 pwr=0 ... -- Max Suraev &lt;msuraev(a)sysmocom.de&gt; http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte