29 Apr
2010
29 Apr
'10
9 a.m.
Hye Andreas,
thanks for the help. That was exactly my problem and you help me solve it.
regards;
Fabrice
Quoting "Andreas.Eversberg" <Andreas.Eversberg(a)versatel.de>de>:
devices)
--
Fabrice Ismael Poundeu Tchouatieu
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
output of "misdn_info"
Found 2 ports
Port 0 'mISDN_l1loop.1': TE/NT-mode PRI E1 (for phone lines & E1 30 B-channels: 1-15
17-31
B-protocols: RAW HDLC X75slp
--------
Port 1 'mISDN_l1loop.2': TE/NT-mode PRI E1 (for phone lines & E1
devices)
30 B-channels: 1-15
17-31
B-protocols: RAW HDLC X75slp
hi fabrice,
the mISDN_l1loop interfaces are used to bring audio channels from the
BTS into the kernel (mISDN driver). there they can be connected to other
ISDN ports or used by chan_lcr (asterisk channel driver). both
interfaces are used by the [GSM] interface. (see gsm.conf) there are two
interfaces: one is for the BTS side and the other for the chan_lcr
(asterisk) side.
since you have no physical interface, i assume that you want to use
asterisk in combination with chan_lcr. but you also have [Int] and [Ext]
interfaces defined. you may only use them if you actually have physical
interfaces. what happens here: the given port numbers 0 and 1 match you
virtual l1loop interfaces, which are already in use for [GSM] interface.
unless you don't have physical cards, remove them. (interface.conf)
now you may route all call from the GSM interface (or any interface to
the chan_lcr:
see routing.conf
[main]
: remote application=asterisk
and from asterisk to lcr:
Dial(LCR/GSM/<extension from hlr>[/<options>])
try a test first:
[main]
: test prefix=5
and you should hear music...
regards,
andreas
p.s. i think we may require a howto. also i think i must put some
'working' packages together at one point to download. sometimes api
changes a bit, so always latest packets may not work together.