Sorry forgot to reply-all and didn't send original mail to ML,
re-sending now.
On 9/14/18 3:25 PM, Pau Espin Pedrol wrote:
Hi Rafael,
You may want to check at PCU_IF_VERSION in both osmo-pcu.git and
osmo-pcu.git
It seems that you are running a recent osmo-pcu together with a quite
old osmo-bts (from at least Feb 28 2018, see osmo-bts.git
4046e3b3dd0cffd53d8d0d1f3e1bf9d0dec83ede), and they are not protocol
compatible.
So you need to either use a newer osmo-bts (preferred I guess) or switch
to an older osmo-pcu which uses PCU_IF_VERSION 7.
If you are using NuRan original firmware, you either ask them to update
their stuff or your are pretty much on your own to build new images
(with non-upstream osmocom versions afaik).
At sysmocom we maintain meta-sysmocom-bsp [1] which together with
system-images [2] and osmocom's meta-telephny [3] allows to build
firmware for both sysmobts and litecell 1.5 machines, together with SDKs
to compile software for them.
I think generated images are not available publicly, but I guess you can
either attempt building them yourself or perhaps ask sysmocom customer
support to have access to it.
[1]
https://git.sysmocom.de/poky/meta-sysmocom-bsp/
[2]
https://git.sysmocom.de/poky/system-images/
[3]
https://git.osmocom.org/meta-telephony/
Regards,
Pau
--
- Pau Espin Pedrol <pespin(a)sysmocom.de>
http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte