Hi Harald,
On 16/06/18 15:58, Harald Welte wrote:
Hi Andrew,
On Fri, Jun 15, 2018 at 05:27:12PM +0100, Andrew Back wrote:
I've had success with running a NITB based on
the new architecture fine
when everything is on one host. However, I'd now like to split this
across multiple hosts.
that should be no problem whatsoever and is actually what we had originally
during development before trying to make it easy for people who run everything
on one host.
Also, please note that all our automatic integration / functional test suites
run each service in a separate docker container, each on its own IP address.
See e.g.
http://git.osmocom.org/docker-playground/tree/ttcn3-bsc-test/osmo-bsc.cfg
for the osmo-bsc.cfg we use in this setup.
Many thanks, the osmo-bsc and osmo-msc configs helped and I now have
handsets registered and can send/receive SMS. However, when I make a
voice call it fails and on the osmo-mgw for osmo-msc, I see in the logs:
Jun 18 16:28:47 cc4 osmo-mgw[507]: #033[0;m<0011> mgcp_msg.c:208 Not
able to find a free endpoint
Jun 18 16:28:47 cc4 osmo-mgw[507]: #033[0;m<0011> mgcp_msg.c:322 Unable
to find Endpoint `rtpbridge/*@mgw'
Jun 18 16:28:47 cc4 osmo-mgw[507]: #033[0;m<0011> mgcp_protocol.c:329
CRCX 5: failed to find the endpoint
There are two separate instances of osmo-mgw, each running on a
dedicated host, with minimal configs as per the NITB instructions, but
using standard port numbers for both since there is no conflict.
Regards,
Andrew