On 24 Aug 2015, at 12:35, Diego Fernandez Alonso
<diegoferalonso(a)gmail.com> wrote:
Hi Holger;
Hi,
your issue changed from “Entry point not found” to something else.
dvnixload debug1: Reading: [Q5 BK�TME]
the RBL doesn’t output such values. You have some issues with the serial console now.
Maybe
the cable broke, maybe the serial board has some issues. Inspect the serial cable.
I'm not sure if maybe I should use the recovery
mode pressing the reset button for trying by other way.
At this point the reset button has no influence. The RBL (bootloader inside the
SoC that loads software from the NAND or serial) is activated because it couldn’t
load a valid image from the NAND flash.