Re: OPENBSC/LCR/Asterisk

Hi, I have installed an infrastructure IPACCESS - OpenBSC - LCR (without misdn) - Asterisk LCR si connected via SIP to Asterisk. The problem is that i can call MT <-> softphone, soft and MT <-> MT BUT i don't hear anything in any side ( softphone <-> softphone works well). I think is a codec problem: Configured TCH/F FR for MT and we tried different codecs (alaw,gsm,ulaw, etc etc). Also I tried bridging GSM and SIP interfaces on LCR config and putting rtp-bridge. On LCR debug I see this error: 000000 DEBUG (in port.cpp/new_state() line 267): PORT(SIP-0-out) new state PORT_STATE_OUT_ALERTING --> PORT_STATE_CONNECT nua: nua_application_event: entering 000000 DEBUG (in sip.cpp/sip_callback() line 1775): Event 7 from stack received (handle=0x94906d8) 000000 DEBUG (in sip.cpp/sip_callback() line 1825): state change received nua: nua_application_event: entering 000000 DEBUG (in sip.cpp/sip_callback() line 1775): Event 7 from stack received (handle=0x94906d8) 000000 DEBUG (in sip.cpp/sip_callback() line 1825): state change received nua: nua_application_event: entering 000000 DEBUG (in sip.cpp/sip_callback() line 1775): Event 5 from stack received (handle=0x94906d8) 000000 DEBUG (in sip.cpp/sip_callback() line 1837): active received 000000 TRACE 06.11.13 20:10:06.434 EP(2): CONNECT from CH(2) connect id number= present='not available' 000000 TRACE 06.11.13 20:10:06.435 EP(1): CONNECT to CH(1) connect id number= present='not available' 000000 TRACE 06.11.13 20:10:06.435 EP(1): TONE to CH(1) off 000000 TRACE 06.11.13 20:10:06.436 CH(1): MNCC_SETUP_RSP LCR<->BSC connected type=0 plan=1 present=0 screen=3 number= 000000 DEBUG (in port.cpp/new_state() line 267): PORT(GSM-0-in) new state PORT_STATE_IN_ALERTING --> PORT_STATE_CONNECT_WAITING 000000 DEBUG (in port.cpp/message_epoint() line 617): PORT(GSM-0-in) setting tone '' dir '' 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 TRACE 06.11.13 20:10:06.563 CH(1): MNCC_SETUP_COMPL_IND LCR<->BSC 000000 DEBUG (in port.cpp/new_state() line 267): PORT(GSM-0-in) new state PORT_STATE_CONNECT_WAITING --> PORT_STATE_CONNECT 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. 000000 DEBUG (in gsm.cpp/audio_send() line 487): no valid CMR yet. <--...--> <-- THIS ERROR REPEATED CONTINUOUSLY DURING THE CALL --> <--...--> Configurations: OpenBSC trx 0 config: trx 0 rf_locked 0 arfcn 636 nominal power 23 max_power_red 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 mncc-int default-codec tch-f fr LCR config: interfaces.conf [GSM] gsm-bs tones yes earlyb no [SIP] extern sip localhost:5059 localhost:5060 tones yes earlyb yes Asterisk User conf: user.conf (one user) [6001] fullname = SIPPhone2 registersip = no host = dynamic callgroup = 1 mailbox = 6001 call-limit = 100 type = peer username = 6001 secret = nomypasshere transfer = yes nat = yes context = openBSC_Integration dtmfmode = rfc2833 cid_number = 6001 disallow = all allow = alaw,gsm ; I Tried different codecs callcounter = no hasvoicemail = no vmsecret = email = threewaycalling = no hasdirectory = no callwaiting = no hasmanager = no hasagent = no hassip = yes hasiax = no canreinvite = no insecure = no pickupgroup = 1 autoprov = yes label = 6001 linenumber = 1 LINEKEYS = 1 Other configs seem irrelevant... -- -- Leonardo Nve &lt;lnve(a)s21sec.com&gt; Project Manager ACSS Grupo S21sec Gestión, S.A. Telefono 628275870 -- La información contenida en este mail, así como los archivos adjuntos,es CONFIDENCIAL. Grupo S21sec Gestión, S.A. garantiza la adopción de las medidas necesarias para asegurar el tratamiento confidencial de los datos de carácter personal. En el caso de que el destinatario del correo no sea usted, le rogamos envíe una notificación al remitente y lo destruya de forma inmediata. La lectura y/o manipulación de esta información en la situación señalada anteriormente será considerada ilegal, permitiendo a la empresa remitente realizar acciones legales de diferente envergadura.