13 Mar
2012
13 Mar
'12
2:44 p.m.
Hi Kwan,
On Tue, Mar 13, 2012 at 01:38:48PM +0000, Kwan wrote:
Yes , that is a BSplus. Interwave engineer will come ,
and take following action:
-add an extra BTS configuration
-enter the proper BTS parameters to allow register and call.
-boot the BTS with its connection to BS+
-after the TRX is online, swap the A-bis E1 of BTS to openBSC.
To my understanding a BSplus has an integrated BSC and connects direclty
ot the MSC using the A(SCCP/BSSAP/BSSMAP) interface. you cannot connect
that to OpenBSC.
Even if you run the Interwave only as a BTS (without the 'plus'), then
you will need detailed documentation and/or protocol traces for their
A-bis OML, and then write the code for that in OpenBSC. So even in the
most ideal situation, I wuold consider a couple of days software
development time are required.
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)