31 Aug
2009
31 Aug
'09
2:34 p.m.
Hi,
thanks for your replies. It was a problem with the old misdn stack.
Seems to work fine now :)
Best regards,
Martin
On Mon, Aug 31, 2009 at 01:27:57PM +0200, Dieter Spaar wrote:
Hello Sergey,
On Mon, 31 Aug 2009 15:11:26 +0400, "Sergey V. Efimoff" <risky(a)mail.ru>
wrote:
What type of E1 adapter do you use? If you use an accurate clock source,
Work and Set values should be similiar (I have Set Value 1024, Work value 1023,
and I've used Nateks E1 SDH Mux with High-Stability Stratum oscillator when
calibrating). See http://bs11-abis.gnumonks.org/trac/wiki/isdnsync
The observed difference of "Work Value 1104" and "Set Value 1082"
should
be no problem. From my measurements a difference of about 100 of those
values means about 0.1 ppm. And 0.1 ppm is good enough that most phones
should see the BS-11 and the offical networks.
I guess there is some other problem, I would also check if bs11_config
shows that the TRX is loaded. And maybe start with a configuration file
which uses only one TRX.
Best regards,
Dieter
--
Dieter Spaar, Germany spaar(a)mirider.augusta.de