1 Dec
2020
1 Dec
'20
10:24 a.m.
Hi Vadim and all,
pyProg.py fails with an error, could you help (btw, I change all real info
to xxx :)):
support@S2600WFT:~/pysim$ python ./pySim-prog.py -p 0 -x 208 -y 93 -t
sysmoUSIM-SJS1 -i 208930000000003 --op=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-k xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -s xxxxxxxxxxxxxxxxxxxxx -a xxxxxxxx
Using PC/SC reader interface
Ready for Programming: Insert card now (or CTRL-C to cancel)
Generated card parameters :
Name : Magic
SMSP : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ICCID : xxxxxxxxxxxxxxxxxxxx
MCC/MNC : 208/93
IMSI : xxxxxxxxxxxxxxx
Ki : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
OPC : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ACC : None
ADM1(hex): xxxxxxxxxxxxxxxx
Programming ...
Card programming failed with an execption:
---------------------8<---------------------
Traceback (most recent call last):
File "./pySim-prog.py", line 719, in <module>
rc = process_card(opts, first, card_handler)
File "./pySim-prog.py", line 671, in process_card
card.program(cp)
File "/home/support/pysim/pySim/cards.py", line 713, in program
self._scc.verify_chv(0x0A, h2b(p['pin_adm']))
File "/home/support/pysim/pySim/commands.py", line 206, in verify_chv
return self._tp.send_apdu_checksw(self.cla_byte + '2000' + ('%02X' %
chv_no) + '08' + fc)
File "/home/support/pysim/pySim/transport/__init__.py", line 104, in
send_apdu_checksw
raise RuntimeError("SW match failed! Expected %s and got %s." %
(sw.lower(), rv[1]))
RuntimeError: SW match failed! Expected 9000 and got 63c9.
---------------------8<---------------------
Programming failed: Remove card from reader
Thanks.
Br,
Andrew
On Tue, Dec 1, 2020 at 1:07 AM Chunlin Yang <chliny2016(a)gmail.com> wrote:
Thanks a lot Vadim!
I have thought it might be an issue between python3 and python2. So I have
tried on both versions.
on Python3, I got same error.
But now with this command 'python ./pySim-read.py -p0', it works. I used
to use this command './pySim-read.py -p0' and it gave me the same error.
But although 'python ./pySim-read.py -p0' works (reads out the content of
the SIM, it gives me an error/prompt at the end:
Traceback (most recent call last):
File "./pySim-read.py", line 255, in <module>
(res, sw) = card.read_ehplmn()
AttributeError: 'OpenCellsSim' object has no attribute 'read_ehplmn'
maybe I can just ignore this prompt as I don't need ehplmn.
Br,
Andrew
On Tue, Dec 1, 2020 at 12:45 AM Vadim Yanitskiy <vyanitskiy(a)sysmocom.de>
wrote:
On 12/1/20 2:17 AM, Chunlin Yang wrote:
ModuleNotFoundError: No module named
'smartcard'
BTW, I have manually imported smartcard in python, and it's successful.
I guess you have two Python versions (2.7 and 3.x), so it could be that
you've installed smartcard for 3.x and in works in the shell.
Unfortunately, pySim has not been completely migrated to 3.x yet, so it
starts under 2.7 by default. You can try to run it under 3.x:
python3 ./pySim-read.py -p0
or install the 'smartcard' module for Python 2.7.
Best regards,
Vadim.
--
- Vadim Yanitskiy <vyanitskiy at sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte