Hi,
We just finished installing the following osmo elements using Ubuntu 14.04 and the
procedures from this link:
https://osmocom.org/projects/cellular-infrastructure/wiki/Ettus_USRP_B2xx_f…
https://osmocom.org/projects/cellular-infrastructure/wiki/Build_from_source
* libosmocore
* libosmo-abis
* libosmo-netif
* openggsn
* libosmo-sccp
* openbsc
* osmo-pcu
* osmo-trx
* osmo-bts
We are now trying to run each applications to test osmo. All applications were run
smoothly except for osmo-trx and osmo-bts-trx.
We also installed the UHD driver of Ettus B2xx series using both “apt-get install” process
and binary process as well using this link:
https://files.ettus.com/manual/page_install.html
https://files.ettus.com/manual/page_build_guide.html
But still, the same errors were received.
Errors received:
# osmo-trx
[INFO] [UHD] linux; GNU C++ version 4.8.4; Boost_105400; UHD_3.11.0.git-128-g379f922d
opening configuration table from path :memory:
Config Settings
Log Level............... NOTICE
Device args.............
TRX Base Port........... 5700
TRX Address............. 127.0.0.1
Channels................ 1
Tx Samples-per-Symbol... 4
Rx Samples-per-Symbol... 1
EDGE support............ Disabled
Reference............... Internal
C0 Filler Table......... Disabled
Multi-Carrier........... Disabled
Diversity............... Disabled
Tuning offset........... 0
RSSI to dBm offset...... 0
Swap channels........... 0
osmo-trx: symbol lookup error: osmo-trx: undefined symbol:
_ZN3uhd6device4findERKNS_13device_addr_tE
# osmo-bts-trx -c /etc/osmo-bts.cfg
((*))
|
/ \ OsmoBTS
There is no such command.
Error occurred during reading below line:
fn-advance 20
Failed to parse the config file: '/etc/osmo-bts.cfg’
What seems to cause this errors?
What logs do we need to check?
Best Regards,
Ron Rylan B. Menez
Operations Manager
+63 998 989 7973
+63 2 893 1781
[cid:D7861C66-51ED-4DB6-B9ED-BADEB28148EC]
Singapore * Philippines
Products:
Gridloc*Intelle*Hype*Lighthouse*Telco Services*Software Development
This email (including any attachment to it) is confidential and intended only for the use
of the individual named above and may contain information that is privileged. If you are
not the intended recipient, you are notified that any dissemination, distribution or
copying of this email is strictly prohibited. If you have received this email in error,
please notify us immediately by return email or telephone and destroy the original message
(including any attachment to it). Thank you.